OPN2003

Revision as of 29 July 2011 12:15 by Jleiseth (Comments | Contribs) | (Documents)
Wireless OPN2003 Large.jpg
OPN2001

To get set up with your OPN2003 follow the steps below.

  • 1) Download the "OPN-2001 PC Companion Application" under software downloads and the "All In One Installer Package" under driver downloads.
  • 2) Double click on the driver installer and follow the instructions.
  • 3) Unzip the OPN2001 application file, and copy both items to a convenient location to launch the application from (no installation is required).
  • 4) Double click on OPN2001.exe to launch the application.
  • 5) Scan barcodes, the connect the OPN2003 to the computer, and click "Get Barcodes"
  • 6) Optionally contact Technical support for help with settings.

Downloads


Notice
The downloading and use of any Opticon software implies consent with Opticon's End User License Agreement.

Documents

Document Description Download
User Manual: Storage Demo This is the user manual for the standard storage demo, which is designed to demonstrate the OPN2003's storage (batch) capabilities. It is meant mostly to demonstrate how to store barcodes for customers that want to create their own customized, embedded application. Download
User Manual: OPN2001 Simulation Application This manual describes the usage of the OPN2001 Simulation Application, an embedded application published by Opticon for the OPN2003, that enables the OPN2003 to behave as an OPN2001 with regard to user behavior and PC interaction. Windows and Mac software specifically written for the OPN2001 is required to transfer or receive data from an OPN2003 running this application. Download


Software

Software Description Download
Appload Appload is Opticon's multi-purpose utility for installing firmware onto devices such as the OPN2003. Currently Windows only. Download
Firmware: Bootloader This is the lowest level of firmware. Download
Firmware: OS One of two pieces of firmware required for the proper functioning of the OPN2003. Appload (see above) is required for loading the OS onto the OPN2003. Download
Firmware: Storage Demo This standard demo application provides batch storage of scanned barcodes. As this demo does not enable Bluetooth pairing or data transmission, all data must be transferred to a host (typically a Windows PC) via USB. Appload (see above) is required for loading this application onto the OPN2003. Download
Firmware: OPN2001 Simulation Application This OPN2003 application enables the OPN2003 to behave as an OPN2001 with regard to user behavior and PC interaction. Windows and Mac software specifically written for the OPN2001 is required to transfer or receive data from an OPN2003 running this application. Appload (see above) is required for loading this application onto the OPN2003. Download
Firmware: Combination - Batch Demo This single file is the Bootloader, OS and Standard Batch Demo packaged into a single file for easy upgrading Download
Firmware: Combination - OPN2001 Simulation Demo This single file is the Bootloader, OS and Standard OPN2001 Emulator Application packaged into a single file for easy upgrading Download
OPN-2001 PC Companion Application While this software was originally intended for use only with our OPN-2001 product, the OPN-2002 and OPN-2003 both are capable of running an OPN-2001 emulator program directly on their hardware that allows them to behave exactly as an OPN-2001. In such circumstances this PC application is required to get your data from the OPN. Download
OPN-2003 Macintosh Companion Application Similar to the PC companion application this version is for the Macintosh OS X platform. Note that due to a known issue this version only supports automatic polling mode (automatically downloading and deleting your data from the OPN as soon as it is plugged in to the Mac). Download
SDK: C-Library Kit The OPN2003 SDK is called the C-Library Kit. Embedded applications are written in C and are compiled with the WinARM GCC compiler. The compiler, source files, API information, libraries, sample code, and examples are provided in the download. Note that the software created with this SDK runs locally on the OPN-2003 directly. And PC side software is beyond the scope of this SDK and strictly speaking is not necessary. Download
OPN-2001 SDK If you are using your OPN-2003 with the OPN-2001 simulation/emulation software than you will need a PC application to communicate with the OPN-2003. This SDK is for use in developing PC side application that can communicate with the OPN-2001 emulation software the correct way. This SDK is not for use to develop application that run directly on the OPN-2003. See the C Library Kit above for that kind of development. Download


Drivers

Platform Description Download
All In One Installer Package USB-to-serial drivers installer package for both 32 and 64 bit versions of Windows XP (32 bit only), Vista, and 7. This package contains two drivers. The first driver is for the OPN-200x as well as many of Opticon's other products. The second driver is for Opticon's cradles and a few other products. You can choose any of the drivers to install on the first screen of the installer program. Download
Macintosh User Mode Driver This driver is not required for Macintosh end users. This driver file is intended for system developers to include in their application package. See the SDK linked above for documentation and usage instructions. Download


Supported Platforms

Setup & Configuration

Usage

Upgrading

While there are multiple components to the firmware on an OPN-2003 (Bootloader, OS and Application) the instructions to load them individually or all together are the same. You simply choose the appropriate file(s) during the right part in the process. All files available from Opticon are found in the Downloads section of this page. In addition to the individual files there are also combination files which are all three components bundled together into a single file for easy installation. It is recommended to use these combination files. As the Bootloader and OS files will always be the same you simply choose the combination file for the application you wish to load.

  • Bootloader files are provided by Opticon and always follow the naming convention beginning with RAFV (e.g. RAFV0306.hex).
  • OS files are provided by Opticon and always follow a naming convention beginning with RBFV (e.g. RBFV0217.hex).
  • Application files are provided by Opticon but could also be provided by a reseller, distributor or developed on ones own by using the freely downloadable SDK (See the downloads section). If provided by Opticon the application files will almost always follow a naming convention beginning with RFF (e.g. RFF35106).
  1. Download necessary files.
    • Firmware: This would be either the Bootloader, OS, Application or combination file from the Downloads section.
    • Appload: This is the loader program for the PC that installs the firmware file onto the unit. See the download section.
    • USB Drivers: These drivers are necessary so that Windows will provide a COM port that Appload needs to communicate with the device. Both 32 bit and 64 bit versions are found in the downloads section.
  2. Install USB Drivers (If you need assistance with this please contact Opticon Technical Support by e-mail at support@opticonusa.com or by phone at 1.800.636.0090 x2127).
  3. Install Appload
    • Unzip the file Appload EAGV0142.zip by right-clicking and selecting 'Extract All'
    • double-click the resulting file 'Appload Setup.exe' which will start the install wizard. You may need to select 'next' a few times and are allowed to choose the install folder and whether Appload places an icon on your desktop. You may simply choose the defaults for all options. Appload will launch at the end of the install process.
  4. Connect the OPN-2003 to your PC
  5. Install the firmware
    • Launch Appload (if it is not already running).
    • select 'Settings' > 'Port' > choose the port that says 'Opticon USB Code Reader(1D)'
    • select 'Settings' > 'IrDA Adapter/Cradle type' > 'Not installed'
    • select 'File' > 'Download' > browse to the firmware file downloaded in step 1 and select it.
  6. When complete the OPN-2003 will emit a series of beeps and reboot. When the LED is steady RED (indicating charging) or GREEN (indicating fully charged) the process is complete and you may disconnect your OPN-2003 from the PC. instruction manuals for the various applications are available for download in the Downloads section.

OPN2001-2003 comparison


Feature OPN2001 Standard Demo firmware OPN2001 HID firmware OPN2003 Standard application (OPN2001 emulator) OPN2003 Batch Demo application
Can the scanned data include a prefix and suffix? If yes, can the Prefix and the Suffix be more than one character (String)? This is not an option with the current firmware, however prefixes or suffixes could be added with custom developed PC side software. Currently return or tab are the only available suffixes, however other prefixes or suffixes could be added with custom developed PC side software. Yes, and yes up to 4 direct input entries. Please refer to page U85 of the universal menu book linked below for more information on prefixes, suffixes preambles, and postambles. http://www.opticonusa.com/pdf/Manuals/Universal_Menu_Book.pdf This is not an option with the current firmware, however prefixes or suffixes could be added with custom developed PC side software.
Does the scanner have an internal serial number that can be output as part of the scanned data? Yes, although we currently only have one PC side application that will put the serial number in the file with the scanned data, the "OPN2001 Data Downloader" application. No Yes, although we currently only have one PC side application that will put the serial number in the file with the scanned data, the "OPN2001 Data Downloader" application. Yes, this is a configurable option. Data is transferred using the NETO32 program or a custom program using the NETO protocol.
Can the scanner be setup to include scanned data time stamp? Yes, using most of our PC side applications including the "OPN2001 Data Downloader" application. Yes Yes, using most of our PC side applications including the "OPN2001 Data Downloader" application. Data stored as Database file (multiple scans of same barcode increases quantity rather than adding new lines to the file, also this means the time stamp only exists for the most recent scan of the specific barcode)

SDK

FAQ

OS Release Log

Links