NetO - Opticon Technical Support Portal

1 About
2 Software Installation
3 Downloads
- 3.1 Software
- 3.2 Drivers

About

NetO (Net-Oh) is the name for Opticon's protocol used for transferring data from our terminal devices to a host PC. Data is transferred as an entire file. Note that NetO must be supported on the application running on the terminal device and a host application must also be running such as NetO32. The necessary libraries to implement NetO protocol on the terminal devices are provided by Opticon in our C-Library Kit. A host SDK is also available to implement NetO within your own application.

Software Installation

In this section we step through installing both Opticon's USB drivers and NetO32.

Installing USB Drivers

If you are using RS232 please skip to Installing NetO32. Opticon's USB drivers need to be installed for the cradle to be properly via USB.

Download the USB drivers from the Driver Downloads section.
Open the zip file by double clicking on it.
Launch the installer by double clicking on it.
Follow the prompts to finish the installation.

Installing NetO32

The OPL9815 uses a piece of windows software called NetO32 to save the data file to the computer. To install NetO32 follow the steps below.

Download NetO32 from the Software Downloads section.
Open the zip file by double clicking on it.
Launch the installer by double clicking on it.
Follow the prompts to finish the installation.

Configuring NetO32

Select 'Tools' > 'Options'
- Choose RS232 from the menu at left
  - Choose the COM port for your cradle (COM 1 if using RS232, check Device Manager for USB ['Start' > 'Run' > 'devmgmt.msc' > click 'OK' and look under the 'Ports' section])
  - Change Baudrate to 115200
  - Change IrDA Device to 'None'
- Choose 'Download' from the menu at left
  - Click the 'browse' folder icon at right to change the destination folder of the file once you have downloaded it.
  - Choose between 'Append', 'Overwrite', and 'Unique' to determine what happens when you download a data file but a file by that same name is already present.
- Click 'OK'
Select 'File' > 'Save As'
- Choose a filename appropriate for you (such as your name or your company's name) to save the settings you just changed.
- Now every time after this that you open NetO32 you must select 'File' > 'Open' and choose this file to load your settings.
Select 'Protocol' > 'Start'

NetO32 is now in 'Polling' mode. Note that you should see the yellow light on the cradle blinking steadily. This means it will sit here indefinitely sending queries to the cradle and waiting for the right response to start a download. Multiple downloads can all be done without ever closing NetO32. When you are done using NetO32 simply select 'Protocol' > 'Stop' and NetO32 will discontinue polling mode. The application can then be closed.

Downloads

Notice: The downloading and use of any Opticon software implies consent with Opticon's End User License Agreement.

Software

Software	Description	Version	Download
NetO SDK plus	The SDK, some sample code and more for NetO.	2015.04.14	Download
NetO32	A PC application implementing the NetO protocol to transfer files from the PC to the terminal barcode reader.	EGF2001H (2.1.0.0)	Download

Drivers

Driver	Description	Version	Download
All-In-One PC Drivers	USB-to-serial drivers installer package for 32 and 64-bit versions of Windows XP (32-bit only), Vista 7, 8, 8.1 and 10. This package contains four drivers. The first and fourth drivers are for the Opticon cradles. The second driver is for the OPN200x scanners along with many other Opticon products. The third driver is an ATEN driver for a popular RS232 <-> USB-VCP adapter. You can choose any of the drivers to install on the first screen of the installer program. Note: Opticon USB Drivers may not install or operate correctly if FIPS (Federal Information Processing Standards) is enabled on your host computer	1.615	Download