Take Picture

Revision as of 10 February 2012 11:01 by Jleiseth (Comments | Contribs)

About

Take Picture is a Windows Application that allows the user to take a picture using the MDIxxxx scan engines.

Download

The Take Picture command guide can be downloaded here.

Take picture versions can be downloaded here

Instructions

To use take picture follow the instructions below:

  • Download and install Take Picture from the link above.
  • Connect your favorite 2D imager barcode scanner or scan engine to your computer.
  • Make sure the scanner is connected via RS232 or is in USB-VCP mode.
  • Open take picture.
  • Select the appropriate com port under Settings-> Port.
  • Select File->Take Picture.
  • Pull the trigger of the scanner.
  • Note: the picture doesn't save automatically, you have to select save.

Compatibility

Take picture is not compatible with all scanners nor is it compatible with all firmware versions.