Take Picture

About

Take Picture is a Windows Application that allows the user to take a picture using the MDIxxxx scan engines.

Download

The Take Picture command guide can be downloaded [here http://ftp.opticonusa.com/TakePicture/MDI2000-2300%20Picture%20Commands%20Guide%20v2%20%205Aug08.pdf]. Take picture versions can be downloaded here

Instructions

To use take picture follow the instructions below:

• Download and install Take Picture from the link above.
• Connect your favorite 2D imager barcode scanner or scan engine to your computer.
• Make sure the scanner is connected via RS232 or is in USB-VCP mode.
• Open take picture.
• Select the appropriate com port under Settings-> Port.
• Select File->Take Picture.
• Pull the trigger of the scanner.
• Note: the picture doesn't save automatically, you have to select save.

Compatibility

Take picture is not compatible with all scanners nor is it compatible with all firmware versions.