OPL2724

Revision as of 01 May 2011 14:55 by Jleiseth (Comments | Contribs) n

Abstract

TheOPL2724 transfers data to the host via bluetooth SPP. When using bluetooth SPP there has to be an application on the host device to receive the data and do something with it, for example Opticon RL can take the serial data and emulate a keyboard stroke.

Overview

This scanner uses wireless barcode technology. Scanned data is transferred to the designated device via wireless communication (Bluetooth V1.2). Short-wavelength red laser beams enhance the visibility of scanning lines for easier aiming under adverse lighting conditions. To start a scan, press the trigger switch. Do not allow the scanner to directly touch the surface of a barcode when scanning. Code options, read options, and communication settings can be configured by sending commands or by reading barcode labels. If the OPL 2724 is disconnected because it is out of range or the Bluetooth device is not available, scanned data will be saved in the built-in scanner memory. The OPL 2724 uses two AAA alkaline batteries as its power supply.

Supported symbologies:

Linear (1D)

JAN/UPC/EAN, incl. add-on Codabar/NW-7 Code 11 Code 39
Code 93 Code 128 GS1-128 (EAN-128) GS1 Databar (RSS) IATA Industrial 2of5 Interleaved 2of5 ISBN-ISMN-ISSN Matrix 2of5 MSI/Plessey S-Code T elepen Tri-Optic UK/Plessey

Postal

Chinese Post Korean Postal Authority Code

2D

Composite Codes MicroPDF417 PDF417

Physical Features

Dimensions

W 96 x D 40 x H 22 mm

Weight

50 g max. (excluding the weight of the battery)

Color

Off white

Operating Temperature and Humidity

Temperature: -5 to 50 °C Humidity: 30 to 80%

Storage Temperature and Humidity

Temperature: -10 to 60 °C Humidity: 20 to 90%