PX35

Revision as of 11 September 2012 16:12 by Jleiseth (Comments | Contribs) | (Software)

About

See here for general information about the PX35.

Device Instructions

Firmware Loading

The following process is used to load firmware onto the PX35. Firmware for the PX35 is divided into three parts: the Bootloader, the OS and an Application file. All three pieces use the same instructions for loading, the only part that changes is the actual file you load. See the downloads section for all available files.

  • Setup and attach the cradle to the PC with which you will be loading firmware onto the device.
  • On the PX35 press together the three button below the display (UP, DOWN, and TRIGGER). This will enter the OS' System Menu.
  • Select the option to download Appl.
  • Select IrDA from the second menu.
  • Place the PX35 in the cradle (top down as always).
  • Using Appload select 'Settings' > 'Port' and choose the COM port the cradle is connected to.
  • Using Appload select 'File' > 'Download' and choose the file you wish to load.
  • Wait until Appload reports success, you can now remove the PX35 from the cradle.

Downloads

Documents

Document Description Download
Quick Start Guide - Generic This is the QSG that comes in the box. Download
User Manual This manual contains detailed information regarding the PX35 hardware, charging methods, accessories, and other more generic details. Download
Application Manual XFF3560x This manual is intended to assist the end user in using the default application when loaded on the PX35. Download
Application Manual XFF3092x This manual is intended to assist the end user in using the OPL972x default application when loaded on the PX35. Download
Application Manual XFF3668x This manual is intended to assist the end user in using the Bluetooth application when loaded on the PX35. Download
Application Manual XFF3669x This manual is intended to assist the end user in using the Image Capture application when loaded on the PX35. Download
DataSheet Technical details at a glance. Download
Universal Menu Book This document contains the majority of Opticon's configuration barcodes necessary to configure the device to your specific needs. Download




Software

Software Description Download
Appload Appload is Opticon's multi-purpose utility for installing firmware onto devices such as the OPL9728. Currently Windows only. Download
NetO32 NetO32 is an application that is used to download data from a few of Opticon's devices. Data is downloaded in whole file format exactly as it is stored on the device it is being uploaded from. Download
Firmware: OS This is the latest Operating System firmware file for the PX35. Download
Firmware: Application - USA Standard XFD3092_ This is the standard application running on all PX35s from our warehouse. It supports a large variety of barcode symbologies (which ones are configurable). Data is stored as a database including the barcode data scanned, the number of times that barcode has been scanned (with optional user quantity input) and the date and time the last entry was updated). This application is similar to the application running on our OPL97__ data collectors. Note: bluetooth capabilities have not been added to this application. Download
Firmware: Application - USA Standard XFD3560_ This is the old standard application. This application is intended to demonstrate the features and functions of the PX-­-35 in an inventory-­-style scenario. With this scenario in mind the PX-­-35 (with this application installed) behaves in very specific ways as detailed in the manual for this applicaiton. Download
Firmware: Application - Bluetooth XFF3668_ This application allows the user to connect as a HID or SPP, master or slave using Bluetooth. Download
Firmware: Application - Camera XFD3669_ An application which takes a picture on the PX35. And save this image on the hard drive and transmit it using Net0. Download


Drivers

Platform Description Download
All In One Installer Package USB-VCP (Virtual COM Port) drivers installer package for Windows XP (32 bit only), Vista (32 and 64), and 7 (32 and 64). This installer package contains two drivers. The first driver is for this device as well as many of Opticon's other products. The second driver is for Opticon's cradles and a few other products. You can choose any of the drivers to install on the first screen of the installer program. You can choose which drivers to install on the first screen of the installer program. Download


Notice
The downloading and use of any Opticon software implies consent with Opticon's End User License Agreement.