OPN2005
This page is currently under construction.
Reset
To restore to factory defaults or in case the device is not responding, there is a feature that will allow a reset of the OPN2005. To perform a reset, hold down both buttons (clear/function and scan) for 30-40 seconds. This will reset the device and clear past pairing information. Once reset the pairing process will need to be performed to reconnect the OPN2005 to your device or computer.
Firmware Loading
While there are multiple components to the firmware on an OPN2005 (Bootloader, OS and Application) the instructions to load them individually or all together are the same. In most cases, all you'll need to do is load the OS, and the proper Application file for your needs.
Preparation
- Download the Firmware: Bootloader Firmware: OS, and Appload for this process available in the Software Downloads section. You may also need Opticon's USB Drivers, so please download those as well.
- Download the appropriate Firmware: Application file for your needs. This is most likely to be the Bluetooth Application, however there are other Applications available. A complete list can be found in the Downloads Section at the bottom of the page.
- Extract the OPN2005 Bootloader and Firmware - OS zip files, the Appload.zip file, the USB Drivers Installer.zip file, and the OPN2005 Firmware - Application files into a convenient folder.
- Install Appload by double-clicking the 'Appload Setup.exe' file, which will start the install wizard. The defaults are fine in most cases, so keep clicking 'Next' until you are finished. Appload will launch at the end of the install process.
- Connect the OPN2005 to your PC
Install the Firmware
- Launch Appload if it is not already running.
- We first need to choose the correct COM port. From the main Appload window, select 'Settings' > 'Port', then choose the port that says 'Opticon USB Code Reader'.
- Now we can start downloading the OS and Application. For each of the .hex files you downloaded and extracted above, please choose 'File', then 'Download', then navigate to and select the file. You should see a progress indicator and the words 'Initializing IRdA' if this is working.
- When complete the OPN2005 will emit a series of beeps and reboot. When the LED is steady RED (indicating charging) or GREEN (indicating fully charged) the process is complete and you may disconnect your OPN2005 from the PC. instruction manuals for the various applications are available for download in the Downloads section.
Downloads
Notice: The downloading and use of any Opticon software implies consent with Opticon's End User License Agreement.
Documents
| Document | Description | Version | Download |
|---|---|---|---|
| Quick Start Guide | This is the first step for someone setting up the OPN2005 for the first time via Bluetooth. Be certain to pay attention to which Bluetooth mode you use. HID (Human Interface Device) is for Bluetooth HID Keyboards and SPP (Serial Port Profile) is for Bluetooth Serial Ports. If uncertain which one to use, choose HID. | Download | |
| DataSheet | Technical details at a glance. | Download | |
| Specification Manual | This document provides detailed specifications for the OPN2005. For advanced users and system integrators only. | Download | |
| iOS toggle Menu Codes | This document contains the two barcodes necessary to enable/disable the keyboard toggle feature when paired with Apple iOS devices (iPhone, iPad, etc.). | Download | |
| Universal Menu Book | The Universal Menu Book is a document containing instructions and configuration options for the majority of Opticon's products. Support of the commands in this manual is product specific. A must read for System Integrators. In effect this is the User Manual for all of Opticon's products that do not have a User Manual of their own and a supplement to all others. | December 2009 | Download |
Software
| Software | Description | Version | Download |
|---|---|---|---|
| Appload | Appload Is Opticon's multi-purpose firmware update utility. It is a Windows PC application that provides the capability to download firmware onto most Opticon products. It also contains a versatile terminal interface that allows serial communication to any serial port connected to the PC (be it RS232, USB-VCP or Bluetooth-SPP). Opticon products can be queried and configured in this manner. | EAGV0186 1.86 |
Download |
| Firmware: Bootloader | This is the lowest level of firmware. Unless instructed by Technical Support it is best to download an Application firmware file as these contain the Bootloader and OS as well as the application in a single file for simpler installation. | RALV0010 | Download |
| Firmware: OS | The Operating System for the OPN2005. Appload (see above) is required for loading the OS onto the OPN2005. Unless instructed by Technical Support it is best to download an Application firmware file as these contain the Bootloader and OS as well as the application in a single file for simpler installation. | RBLV0023 | Download |
| Firmware: Bluetooth Application | This standard application provides Bluetooth functionality and data transfer for both HID and SPP modes, as well as easy toggling of the iOS (iPhone/iPad/iPod) system soft keyboard. Batch storage is not supported. This application is pre-loaded on all OPN2005s prior to shipping. Appload (see above) is required for loading this application onto the OPN2005. This firmware file contains the latest Bootloader, OS and Application. | RALV0010 RBLV0023 RFL37917 |
Download |
| Firmware: OPN2001 Emulator Application | This application enables the OPN2005 to behave as an OPN2001 with regard to user behavior and PC interaction. The OPN PC Application (see below) is required to transfer data between the OPN and the PC. Appload (see above) is required for loading this application onto the OPN2005. This firmware file contains the latest Bootloader, OS and Application. | RFI37277 | Download |
| OPN PC Companion Application (OPN200x) | The OPN2001 (and any OPN running its version of the OPN2001 emulator firmware) requires the use of a PC side application to communicate and receive the scanned barcode data. This is Opticon's free standard application. A free SDK is also available to customize this application. | EGF3800J 2.19 |
Download |
| OPN PC Companion Application Source Code | The Visual Studio source files for Opticon's OPN PC Companion Application | EGF3800E | Download |
| C-Library Kit | The C-Library Kit is Opticon's SDK for developing custom firmware for many of Opticon's product families (OPN, OPL97xx, OPL98xx, OPH, etc.). Included find sample code, full application samples, library files, documentation, compilers for certain products and more. This download is a zipped collection of the installer and associated files. The Toshiba C Compiler requires a separate download which is located here | 2.38 | Download |
Drivers
| Driver | Description | Version | Download |
|---|---|---|---|
| All-In-One PC Drivers | USB-to-serial drivers installer package for 32 and 64-bit versions of Windows XP (32-bit only), Vista 7, 8, 8.1 and 10. This package contains four drivers. The first and fourth drivers are for the Opticon cradles. The second driver is for the OPN200x scanners along with many other Opticon products. The third driver is an ATEN driver for a popular RS232 <-> USB-VCP adapter. You can choose any of the drivers to install on the first screen of the installer program. *Note: Opticon USB Drivers may not install or operate correctly if FIPS (Federal Information Processing Standards) is enabled on your host computer* | 1.615 | Download |