OPN2004
OPN-2004 Quick Start
PC
Using the OPN-2004 with a Windows PC requires you to download and install Opticon's PC USB Drivers Installer, and an application to retrieve the data like the PC Companion Application. Both of these are located in the Downloads section of this page.
Initial Setup
You will only need to do this part once per computer.
- Download the "PC USB Drivers Installer" from the Driver Downloads section of this page. Run the installer you downloaded by double-clicking on it. Follow the prompts on your screen until the installation is completed.
- Download the OPN-2001 PC Companion Application which is also located in the Software Downloads section of this page.
- Run the installer in the zip file you downloaded.
- Plug the OPN-2004 into your computer. Windows will inform you that it has found new hardware, and that it is installing the drivers for that hardware. Then you will see the status indicator in the application window turn green. From the application window you can download barcodes, change settings, or view and set the date and time on the device.
Scan Barcodes
Collecting data with the OPN-2004 is as simple as pointing and scanning. Scanning barcodes with the big button or "trigger" will store barcodes, while scanning with the small button or "function" will remove barcodes. Below are some tips about scanning and removing barcodes from the device.
- When the OPN-2004 has a good scan, it will chime, the LED on the device will flash green, and the laser will turn off.
- When the OPN-2004 deletes a barcode, it will give a different chime than above, and it will flash an Orange LED when it has a good scan.
- Deleting the same barcode again when there are no more scans of it present will cause the OPN-2004 to chime for about a second. The LED will also flash red.
Download From the OPN-2004
If you haven't done so yet, refer to the Initial Setup instructions above to get all the proper software installed and ready. This part of the guide assumes that you have already successfully setup your computer to communicate with the OPN-2004.
- Plug the OPN-2004 into your computer.
- Open the OPN-2001 PC Companion Application by navigating to Opticon\OPN200x in your Start Menu.
- Double-check that the "Status" light is green.
- Check the box next to "Save to file" if you would like your barcodes to be saved to your computer each time you select "Get Barcodes." By default, the barcodes will be stored in the Documents folder on your computer. To change this, click on the ellipsis(...) button and choose where you would like your barcodes saved.
- Click "Get barcodes" to download the barcodes that you just scanned. Double-check that they got saved to your file before proceeding.
- Click "Delete barcodes" to erase the barcodes stored on the OPN-2004.
Migrating from the OPN2001 or the OPN2003
If you are migrating from using the OPN2001 or the OPN2003 to the OPN2004 please contact Opticon Tech Support.
Alternative Modes
In addition to the CSP2 support built into the OPN2004, it is also capable of functioning as either a USB Keyboard or a USB flash drive. Both of these modes eliminate the need for middleware.
When in Keyboard mode, the OPN2003 can scan in real time or store data in memory which can later be transmitted at the push of a button. In flash disk(MSD) mode the OPN2003 stores barcode scans into a text file on the device. The text file can later be accessed simply by plugging in the device.
USB Flash Disk Mode
This mode is also referred to as USB-MSD mode. The Firmware: Storage Application must be loaded on the OPN2004 in order to enable this mode of operation. To install the Storage Demo, follow these firmware loading instructions. Once the storage demo is loaded, print and scan this sheet of barcodes to configure the device to act as a flash disk.
Once that's finished, scanning barcodes is as simple as pressing a button. When you want to download your barcode scans, plug the OPN2004 into a computer, and copy the text file out of the flash drive. For more configuration options, see the Storage Demo manual. In particular, the very last page has barcodes which can be scanned to configure the layout of the text file.
USB Keyboard Mode
This mode allows the OPN2004 to emulate a USB Keyboard. While the OPN2004 is plugged in, any barcodes that are scanned are input wherever the cursor is on screen. When a barcode is scanned while the OPN2004 is disconnected, the barcode is stored in memory. When you want to retrieve scanned barcodes, simply plug the OPN2004 into a computer, and press any key on the device to have it play back all of the barcodes that were scanned while it was disconnected.
To use the OPN2004 in USB Keyboard Mode, print and scan this barcode sheet. You may also need to update firmware to the latest version of the Firmware: Application to enable the feature.
Downloads
| Notice |
| The downloading and use of any Opticon software implies consent with Opticon's End User License Agreement. |
Documents
| Document | Description | Download |
|---|---|---|
| User Manual: Storage Application | This is the user manual for the standard storage application, which is designed to demonstrate the OPN2003's storage (batch) capabilities. This application supports USB-VCP with NetO32, and USB-MSD (flash drive) modes. | Download |
| User Manual: OPN2001 Simulation Application | This manual describes the usage of the OPN2001 Simulation Application, an embedded application published by Opticon for the OPN2004, that enables the OPN2004 to behave as an OPN2001 with regard to user behavior and PC interaction. Windows and Mac software specifically written for the OPN2001 is required to transfer or receive data from an OPN2004 running this application. | Download |
Software
| Software | Description | Download |
|---|---|---|
| Appload | Appload is Opticon's multi-purpose utility for installing firmware onto devices such as the OPN2004. Currently Windows only. | Download |
| Firmware: OS | One of two pieces of firmware required for the proper functioning of the OPN2004. Appload (see above) is required for loading the OS onto the OPN2004. | Download |
| Firmware: OPN2001 Simulation Application | This OPN2004 application enables the OPN2004 to behave as an OPN2001 with regard to user behavior and PC interaction. Windows and Mac software specifically written for the OPN2001 is required to transfer or receive data from an OPN2004 running this application. Appload (see above) is required for loading this application onto the OPN2004. NOTICE: Current and future versions of this Application now support USB-HID in addition to the standard CSP2 features | Download |
| Firmware: Storage Application | This application provides batch storage of scanned barcodes. Appload (see above) is required for loading this application onto the OPN2004. | Download |
| OPN-200X PC Companion Application | While this software was originally intended for use only with our OPN-2001 product, the OPN-2002, OPN-2003, and OPN-2004 are all capable of running an OPN-2001 emulator program that allows them to behave like an OPN-2001. In such circumstances this PC application is required to get your data from the OPN. | Download |
| SDK: C-Library Kit | The OPN2004 SDK is called the C-Library Kit. Embedded applications are written in C and are compiled with the WinARM GCC compiler. The compiler, source files, API information, libraries, sample code, and examples are provided in the download. Note that the software created with this SDK runs locally on the OPN-2004 directly. And PC side software is beyond the scope of this SDK and strictly speaking is not necessary. | Support for the OPN2004 is Coming Soon |
| OPN-2001 SDK | If you are using your OPN-2004 with the OPN-2001 simulation/emulation software than you will need a PC application to communicate with the OPN-2004. This SDK is for use in developing PC side application that can communicate with the OPN-2001 emulation software the correct way. This SDK is not for use to develop application that run directly on the OPN-2004. See the C Library Kit above for that kind of development. | Download |
Drivers
| Platform | Description | Download |
|---|---|---|
| All In One Installer Package | USB-to-serial drivers installer package for both 32 and 64 bit versions of Windows XP (32 bit only), Vista, and 7. This package contains two drivers. The first driver is for the OPN-200x as well as many of Opticon's other products. The second driver is for Opticon's cradles and a few other products. You can choose any of the drivers to install on the first screen of the installer program. | Download |
| Macintosh User Mode Driver | This driver is not required for Macintosh end users. This driver file is intended for system developers to include in their application package. See the SDK linked above for documentation and usage instructions. | Download |
Loading Firmware
While there are multiple components to the firmware on an OPN-2004 (Bootloader, OS and Application) the instructions to load them individually or all together are the same. In most cases, all you'll need to do is load the OS, and the proper Application file for your needs.
Preparation
- Download both the Firmware: OS, and Appload for this process. You may also need Opticon's USB Drivers, so please download those as well.
- Download the appropriate Firmware: Application file for your needs. This is most likely to be the OPN2001 Simulation Application, however there are other Applications available. A complete list can be found in the Downloads Section at the bottom of the page.
- Extract the OPN2004 Firmware - OS.zip file, the Appload.zip file, the USB Drivers Installer.zip file, and the OPN2004 Firmware - Application files into a convenient folder.
- Install Appload by double-clicking the 'Appload Setup.exe' file, which will start the install wizard. The default values are sufficient for most people, so keep clicking 'Next' until you are finished. Appload will launch at the end of the install process.
- Connect the OPN-2004 to your PC
Install the Firmware
- Launch Appload if it is not already running.
- We first need to choose the correct COM port. From the main Appload window, select 'Settings' > 'Port', then choose the port that says 'Opticon USB Code Reader'.
- Now we can start downloading the OS and Application. For each of the .hex files you downloaded and extracted above, please choose 'File', then 'Download', then navigate to and select the file. You should see a progress indicator and the words 'Initializing IRdA' if this is working.
- When complete the OPN-2004 will emit a series of beeps and reboot. When the LED is steady RED (indicating charging) or GREEN (indicating fully charged) the process is complete and you may disconnect your OPN-2004 from the PC. instruction manuals for the various applications are available for download in the Downloads section.
OPN2001, OPN2003, OPN2004 comparison
| Feature | OPN2001 Standard Demo firmware | OPN2001 HID firmware | OPN2003 Standard application (OPN2001 emulator) | OPN2003 Batch Demo application | OPN2004 Standard application (OPN2001 emulator) |
|---|---|---|---|---|---|
| Can the scanned data include a prefix and suffix? If yes, can the Prefix and the Suffix be more than one character (String)? | This is not an option with the current firmware, however prefixes or suffixes could be added with custom developed PC side software. | Currently return or tab are the only available suffixes, however other prefixes or suffixes could be added with custom developed PC side software. | Yes, and yes up to 4 direct input entries. Please refer to page U85 of the universal menu book linked below for more information on prefixes, suffixes preambles, and postambles. http://www.opticonusa.com/pdf/Manuals/Universal_Menu_Book.pdf | This is not an option with the current firmware, however prefixes or suffixes could be added with custom developed PC side software. | Yes, and yes up to 4 direct input entries. Please refer to page U85 of the universal menu book linked below for more information on prefixes, suffixes preambles, and postambles. http://www.opticonusa.com/pdf/Manuals/Universal_Menu_Book.pdf |
| Does the scanner have an internal serial number that can be output as part of the scanned data? | Yes, although we currently only have one PC side application that will put the serial number in the file with the scanned data, the "OPN2001 Data Downloader" application. | No | Yes, although we currently only have one PC side application that will put the serial number in the file with the scanned data, the "OPN2001 Data Downloader" application. | Yes, this is a configurable option. Data is transferred using the NETO32 program or a custom program using the NETO protocol. | Yes, although we currently only have one PC side application that will put the serial number in the file with the scanned data, the "OPN2001 Data Downloader" application. |
| Can the scanner be setup to include scanned data time stamp? | Yes, using most of our PC side applications including the "OPN2001 Data Downloader" application. | Yes | Yes, using most of our PC side applications including the "OPN2001 Data Downloader" application. | Data stored as Database file (multiple scans of same barcode increases quantity rather than adding new lines to the file, also this means the time stamp only exists for the most recent scan of the specific barcode) | Yes, using most of our PC side applications including the "OPN2001 Data Downloader" application. |
FAQ
Can the OPN-2004 be used in USB Keyboard mode as well as CSP2 mode?
Yes, while in this mode you don't need to use the PC Companion Application to retrieve barcode scans. Simply plug the device in, open up Notepad or other software capable of receiving keyboard input, and press the small key on the OPN-2004 and it will transmit stored barcodes. You can also scan barcodes in real time while plugged in.
My OPN-2004 has suddenly stopped beeping when I scan barcodes. Is it broken?
It's possible that the beeper has been disabled using the beeper toggle feature. The beeper can be disabled or enabled without using a computer if you hold the large key for more than 10 seconds. To re-enable a disabled beeper, try holding this key for about 10 seconds. The OPN will sound a tone when the beeper is re-enabled.