| |
==To get set up with your OPN2003 follow the steps below.== |
|
==To get set up with your OPN2003 follow the steps below.== |
| |
|
+ |
If you are having trouble getting the OPN-2003 to connect to the Mac Companion Application, try printing the PDF that was included with the installer, and scanning the +-USB1-+ barcode on the page. Your OPN-2003 will sound a tone, then after a few seconds it will connect.
|
| |
*1) Download the "OPN-2001 PC Companion Application" under software downloads and the "All In One Installer Package" under driver downloads. |
|
*1) Download the "OPN-2001 PC Companion Application" under software downloads and the "All In One Installer Package" under driver downloads. |
| |
*2) Double click on the driver installer and follow the instructions. |
|
*2) Double click on the driver installer and follow the instructions. |
| |
*5) Scan barcodes, the connect the OPN2003 to the computer, and click "Get Barcodes" |
|
*5) Scan barcodes, the connect the OPN2003 to the computer, and click "Get Barcodes" |
| |
*6) Optionally contact Technical support for help with settings. |
|
*6) Optionally contact Technical support for help with settings. |
| |
|
+ |
In order to set up the OPN-2003 on the Mac, we will need to install the Mac Companion Application and configure the OPN-2003 to connect to the Mac.
|
| |
|
+ |
*1.) To install the Mac Companion Application, download the "OPN-2003 MAC Companion Application" under software downloads near the bottom of this page. Open the resulting folder, and run the installer "Opticon OPN Demo Application.pkg." Follow the prompts until the installation is complete.
|
| |
|
+ |
*2.) Print the PDF document in the same folder titled "Instructions.pdf." This document contains configuration barcodes for the OPN-2003. These barcodes are used to change the behavior of the OPN-2003 when it connects to a computer. Scan the +-USB1-+ driver to set the OPN-2003 up to connect to the Mac Companion Application.
|
| |
|
+ |
*3.) Plug the OPN-2003 into the Mac. At this point the OPN-2003 should be recognized as a network interface.
|
| |
|
+ |
*4.) Start up the OPN-2003 Mac Companion Application using the Finder. It will automatically detect the OPN-2003. The connection can be confirmed by the green "Connected" text in the top right corner of the application.
|
| |
|
+ |
The OPN-2003 and the Mac are now connected and working together.
|
