Version Differences for OPN2003 - Opticon Technical Support Portal

===USB Flash Disk Mode===

-

This mode is also referred to as USB-MSD mode. The Firmware: Storage Application must be loaded on the OPN2003 in order to enable this mode of operation. To install the Storage Demo, follow these [https://wiki.opticonusa.com/techsupport/en/OPN2003#Loading_Firmware firmware loading] instructions. You may have to update the OS in addition to loading the Storage Demo to enable this feature. Once the storage demo is loaded, print and scan [http://opticonfigure.opticon.com/sl/?z=Fi&a=4&b=0&d=1 this] sheet of barcodes to configure the device to act as a flash disk.

+

This mode is also referred to as USB-MSD mode. The Firmware: Storage Application must be loaded on the OPN2003 in order to enable this mode of operation. To install the Storage Demo, follow these [[#Loading_Firmware|firmware loading]] instructions. You may have to update the OS in addition to loading the Storage Demo to enable this feature. Once the storage demo is loaded, print and scan [http://opticonfigure.opticon.com/sl/?z=Fi&a=4&b=0&d=1 this] sheet of barcodes to configure the device to act as a flash disk.

Once that's finished, scanning barcodes is as simple as pressing a button. When you want to download your barcode scans, plug the OPN2003 into a computer, and copy the text file out of the flash drive. For more configuration options, see the [http://ftp.opticonusa.com/Downloads/User Manual - RFG3541x.zip Storage Demo manual]. In particular, the very last page has barcodes which can be scanned to configure the layout of the text file.

 ===USB Flash Disk Mode===
-								This mode is also referred to as USB-MSD mode. The Firmware: Storage Application must be loaded on the OPN2003 in order to enable this mode of operation. To install the Storage Demo, follow these [https://wiki.opticonusa.com/techsupport/en/OPN2003#Loading_Firmware firmware loading] instructions. You may have to update the OS in addition to loading the Storage Demo to enable this feature. Once the storage demo is loaded, print and scan [http://opticonfigure.opticon.com/sl/?z=Fi&a=4&b=0&d=1 this] sheet of barcodes to configure the device to act as a flash disk.
+								This mode is also referred to as USB-MSD mode. The Firmware: Storage Application must be loaded on the OPN2003 in order to enable this mode of operation. To install the Storage Demo, follow these [[#Loading_Firmware|firmware loading]] instructions. You may have to update the OS in addition to loading the Storage Demo to enable this feature. Once the storage demo is loaded, print and scan [http://opticonfigure.opticon.com/sl/?z=Fi&a=4&b=0&d=1 this] sheet of barcodes to configure the device to act as a flash disk.
 Once that's finished, scanning barcodes is as simple as pressing a button. When you want to download your barcode scans, plug the OPN2003 into a computer, and copy the text file out of the flash drive. For more configuration options, see the [http://ftp.opticonusa.com/Downloads/User Manual - RFG3541x.zip Storage Demo manual]. In particular, the very last page has barcodes which can be scanned to configure the layout of the text file.