| |
The OPN-2003 and the Mac are now connected and working together. |
|
The OPN-2003 and the Mac are now connected and working together. |
| |
|
+ |
In addition to the CSP2 support built into the OPN2003, it is also capable of functioning as either a USB Keyboard or a USB flash drive. Both of these modes eliminate the need for middleware.
|
| |
|
+ |
When in Keyboard mode, the OPN2003 can scan in real time or store data in memory which can later be transmitted at the push of a button. In flash disk(MSD) mode the OPN2003 stores barcode scans into a text file on the device. The text file can later be accessed simply by plugging in the device.
|
| |
|
+ |
===USB Flash Disk Mode===
|
| |
|
+ |
This mode is also referred to as USB-MSD mode. The Firmware: Storage Demo application must be loaded on the OPN2003 in order to enable this mode of operation. To install the Storage Demo, follow these [https://wiki.opticonusa.com/techsupport/en/OPN2003#Loading_Firmware firmware loading] instructions. You may have to update the OS in addition to loading the Storage Demo to enable this feature. Once the storage demo is loaded, print and scan [http://opticonfigure.opticon.com/sl/?z=Fi&a=4&b=0&d=1 this] sheet of barcodes to configure the device to act as a flash disk.
|
| |
|
+ |
Once that's finished, scanning barcodes is as simple as pressing a button. When you want to download your barcode scans, plug the OPN2003 into a computer, and copy the text file out of the flash drive. For more configuration options, see the [http://ftp.opticonusa.com/Downloads/User Manual - RFG3541x.zip Storage Demo manual]. In particular, the very last page has barcodes which can be scanned to configure the layout of the text file.
|
| |
|
+ |
This mode allows the OPN2003 to emulate a USB Keyboard. While the OPN2003 is plugged in, any barcodes that are scanned are input wherever the cursor is on screen. When a barcode is scanned while the OPN2003 is disconnected, the barcode is stored in memory. When you want to retrieve scanned barcodes, simply plug the OPN2003 into a computer, and press any key on the device to have it play back all of the barcodes that were scanned while it was disconnected.
|
| |
|
+ |
To use the OPN2003 in USB Keyboard Mode, print and scan this [http://opticonfigure.opticon.com/sl/?z=ki&a=4&b=0&d=1 barcode sheet]. You may also need to [https://wiki.opticonusa.com/techsupport/en/OPN2003#Loading_Firmware update firmware] to the latest version of the Firmware: OS and Firmware: Application to enable the feature.
|
