Version Differences for OPN2002

(→Windows XP in HID mode)
(→Usage)
Line 139:
  ==Usage==    ==Usage== 
       
- ===Windows XP in HID mode===   + ===Using your OPN2002 with Windows XP in HID mode===  
  Follow the instructions below to set up your OPN2002 with Windows XP in HID mode.    Follow the instructions below to set up your OPN2002 with Windows XP in HID mode. 
       
Line 155:
  # Windows will pop up with a message that says"The Bluetooth device was successfully connected..." Select Finish    # Windows will pop up with a message that says"The Bluetooth device was successfully connected..." Select Finish 
  #Open a program with a text field like Notepad, and scan a barcode to make sure it worked    #Open a program with a text field like Notepad, and scan a barcode to make sure it worked 
       
       
    + ===Using your OPN2002 with an [[H19]] Windows Mobile device in HID mode===  
    + Follow the instructions below to set up your OPN2002 with an [[H19]] Windows Mobile device in HID mode.  
       
    + #Make sure both your OPN2002 and your H19 are charged.  
    + #Turn on your H19.  
    + #Navigate to the following location. Start->Settings->Connections->Wireless Manager  
    + #Turn bluetooth on if it is not already on. Bluetooth Is on when the button with the Bluetooth symbol is yellow.  
    + #Select OK to close out of the window.  
    + #Select Bluetooth.  
    + #Locate your [[OPN2002]] and [http://ftp.opticonusa.com/OPN2002/Documents/OPN2002%20Bluetooth%20QSG%20Insert.pdf OPN2002 Quick Start Guide for HID].  
    + #Follow steps one and two of the OPN2002 Quick Start Guide for HID.  
    + #On the H19 select "Add new device...".  
    + #Select the OPN2002_2D1D device from the list of devices, then select next.  
    + #Enter in a numeric passcode.(Keep in mind the fact that you will have to scan the numbers you choose in the next step.)  
    + #complete step 3 of the [http://ftp.opticonusa.com/OPN2002/Documents/OPN2002%20Bluetooth%20QSG%20Insert.pdf OPN2002 Quick Start Guide for HID]  
    + #Select the check box for input device.  
    + #Select finish.  
    + #OPN2002_2D1D should now be in the list of bluetooth devices.  
    + #Open a program with a text field like Notepad, and scan a barcode to verify it you have paired successfully.  
  ==Upgrading==    ==Upgrading== 
  While there are multiple components to the firmware on an OPN-2002 (Bootloader, OS and Application) the instructions to load them individually or all together are the same. You simply choose the appropriate file(s) during the right part in the process. All files available from Opticon are found in the Downloads section of this page. In addition to the individual files there are also combination files which are all three components bundled together into a single file for easy installation. It is recommended to use these combination files. As the Bootloader and OS files will always be the same you simply choose the combination file for the application you wish to load.    While there are multiple components to the firmware on an OPN-2002 (Bootloader, OS and Application) the instructions to load them individually or all together are the same. You simply choose the appropriate file(s) during the right part in the process. All files available from Opticon are found in the Downloads section of this page. In addition to the individual files there are also combination files which are all three components bundled together into a single file for easy installation. It is recommended to use these combination files. As the Bootloader and OS files will always be the same you simply choose the combination file for the application you wish to load.