Version Differences for OPN2002 - Opticon Technical Support Portal

==Usage==

+

===Windows XP in HID mode===

+

Follow the instructions below to set up your OPN2002 with Windows XP in HID mode.

+

#Make sure that your computer has bluetooth capabilities if it doesn't purchase a bluetooth dongle, install the dongle and the BT drivers for it

+

#Select Start

+

#Select Control Panel

+

#Make sure you are in classic view, if you are not then switch to classic view

+

#Double click the icon that says Bluetooth Devices

+

#Under the devices tab select Add

+

#follow steps one and two of the OPN2002 Quick Start Guide for HID

+

#Select my device is set up and ready to be found.

+

#Select the OPN2002_2D1D device from the list of devices

+

#Select Next (I will describe the process for "choose a passkey for me" although you can select one of the other options.)

+

#complete step 3 of the OPN2002 Quick Start Guide for HID

+

# Windows will pop up with a message that says"The Bluetooth device was successfully connected..." Select Finish

+

#Open a program with a text field like Notepad, and scan a barcode to make sure it worked

==Upgrading==

While there are multiple components to the firmware on an OPN-2002 (Bootloader, OS and Application) the instructions to load them individually or all together are the same. You simply choose the appropriate file(s) during the right part in the process. All files available from Opticon are found in the Downloads section of this page. In addition to the individual files there are also combination files which are all three components bundled together into a single file for easy installation. It is recommended to use these combination files. As the Bootloader and OS files will always be the same you simply choose the combination file for the application you wish to load.

 ==Usage==
 								===Windows XP in HID mode===
 								Follow the instructions below to set up your OPN2002 with Windows XP in HID mode.
 								#Make sure that your computer has bluetooth capabilities if it doesn't purchase a bluetooth dongle, install the dongle and the BT drivers for it
 								#Select Start
 								#Select Control Panel
 								#Make sure you are in classic view, if you are not then switch to classic view
 								#Double click the icon that says Bluetooth Devices
 								#Under the devices tab select Add
 								#follow steps one and two of the OPN2002 Quick Start Guide for HID
 								#Select my device is set up and ready to be found.
 								#Select the OPN2002_2D1D device from the list of devices
 								#Select Next (I will describe the process for "choose a passkey for me" although you can select one of the other options.)
 								#complete step 3 of the OPN2002 Quick Start Guide for HID
 								# Windows will pop up with a message that says"The Bluetooth device was successfully connected..." Select Finish
 								#Open a program with a text field like Notepad, and scan a barcode to make sure it worked
 ==Upgrading==
 While there are multiple components to the firmware on an OPN-2002 (Bootloader, OS and Application) the instructions to load them individually or all together are the same. You simply choose the appropriate file(s) during the right part in the process. All files available from Opticon are found in the Downloads section of this page. In addition to the individual files there are also combination files which are all three components bundled together into a single file for easy installation. It is recommended to use these combination files. As the Bootloader and OS files will always be the same you simply choose the combination file for the application you wish to load.