Version Differences for OPN2002

Revision as of 29 July 2010 14:02

Administrator (Comments | Contribs)

(→FAQ)

← Previous diff

Revision as of 29 July 2010 14:03 m

Administrator (Comments | Contribs)

(→FAQ)

Line 4:
	:So Unix machines - which is what a Mac essentially is - have their serial ports implemented in a different way, from what you might be used to with a Windows PC. When a serial device is connected to the Mac, and the kernel is able to map a valid kernel driver to it, a POSIX device file is created under /dev/ for that serial port. After that, programs can read and write to this file, which becomes the same thing as reading and writing from a serial port. Windows uses a similar concept with COM (serial) ports, just implemented slightly differently.		:So Unix machines - which is what a Mac essentially is - have their serial ports implemented in a different way, from what you might be used to with a Windows PC. When a serial device is connected to the Mac, and the kernel is able to map a valid kernel driver to it, a POSIX device file is created under /dev/ for that serial port. After that, programs can read and write to this file, which becomes the same thing as reading and writing from a serial port. Windows uses a similar concept with COM (serial) ports, just implemented slightly differently.

-	Now, when you connect the OPN2002 to the Mac using Bluetooth VCP (SPP), one of these POSIX device files is created in /dev/. To finish the initial connection, that file must be opened with some program - namely yours. To test this yourself, you can use the Terminal program, and run the 'cat' command against the new file that was created under /dev/ while the pairing process was taking place. After that, the initial pairing should complete successfully.	+	:Now, when you connect the OPN2002 to the Mac using Bluetooth VCP (SPP), one of these POSIX device files is created in /dev/. To finish the initial connection, that file must be opened with some program - namely yours. To test this yourself, you can use the Terminal program, and run the 'cat' command against the new file that was created under /dev/ while the pairing process was taking place. After that, the initial pairing should complete successfully.