Version Differences for OPN-3102i

(→Batch Mode)
Line 17:
       
  However, once reconnected, the data will begin streaming immediately. It is recommended that you have a text editor or application open, assuming the OPN3102 is in BT-HID mode, so that the data has somewhere to go.    However, once reconnected, the data will begin streaming immediately. It is recommended that you have a text editor or application open, assuming the OPN3102 is in BT-HID mode, so that the data has somewhere to go. 
- To cause the OPN3102i to wait for a button press before streaming, scan [http://opticonfigure.opticon.com/sl/?z=1c1&a=4&b=2&d=1 this configuration sheet.]   + To cause the OPN3102i to wait for a button press before streaming, scan [http://opticonfigure.opticon.com/sl/?z=1c1&a=4&b=2&d=1 this configuration sheet.]  
       
  To sever the Bluetooth connection, hold down the trigger/scan button until you hear a disconnect tone (or scan the "Manual Disconnect" scan code '+-DISC-+' - See the Universal Menu Book for the menu scan code symbols) -- This action just disconnects from the current Bluetooth host computer until it has something else to send.    To sever the Bluetooth connection, hold down the trigger/scan button until you hear a disconnect tone (or scan the "Manual Disconnect" scan code '+-DISC-+' - See the Universal Menu Book for the menu scan code symbols) -- This action just disconnects from the current Bluetooth host computer until it has something else to send. 
Line 27:
  When your application is open and ready in your host and you are in-range, scan the auto-connect menu code 'ENAU' or just hold down the trigger/scan button until you see the blue LED indicator flash - it should re-connect to the last paired device AND:    When your application is open and ready in your host and you are in-range, scan the auto-connect menu code 'ENAU' or just hold down the trigger/scan button until you see the blue LED indicator flash - it should re-connect to the last paired device AND: 
       
- * If configured for HID mode - it will dump the data into the open application, like a keyboard entry.   + * If configured for HID mode - it will dump the data into the open application, like a keyboard entry. To have the data stream over a USB cable scan [https://opticonfigure.opticon.com/configure?scanner=OPN3102&type=2D&i=0&pdf=A4&sheet=W1siQzExIl1d this configuration sheet.]  
       
  * If in SPP mode, it will dump the data into the computer's appropriate COM port.    * If in SPP mode, it will dump the data into the computer's appropriate COM port.