OPN-3102i
About (2D Imager Companion Scanner)
The OPN3102i Bluetooth Companion Scanner with a 2D imager scan engine that can decode 1D and 2D bar codes. This companion scanner enables real-time bar code scanning by pairing with any Bluetooth-ready device including Android, iOS, Blackberry and Windows devices.
- The OPN3102i is certified as a MFi device (Made For iDevices) https://developer.apple.com/programs/mfi/
- The OPN3102i Does NOT have an application layer, so there is no Opticon SDK development software for the OPN device itself.
- Your developer may however create their own iPhone/iPad like program (similar to our AppStore downloadable OPNTerm program)
- To do that, your developer must download & use Apple’s XCode platform: https://developer.apple.com/xcode/
- The SDK document instructions & SDK-Bluetooth framework should help a MFi developer with the OPN3102i specific information.
Batch Mode
Batch mode will be enabled when the device is no longer connected via bluetooth.
However, once reconnected, the data will begin streaming immediately. It is recommended that you have a text editor or application open, assuming the OPN3102 is in BT-HID mode, so that the data has somewhere to go. To cause the OPN3102i to wait for a button press before streaming, scan this configuration sheet.
To sever the Bluetooth connection, hold down the trigger/scan button until you hear a disconnect tone (or scan the "Manual Disconnect" scan code '+-DISC-+' - See the Universal Menu Book for the menu scan code symbols) -- This action just disconnects from the current Bluetooth host computer until it has something else to send.
To keep from auto-connecting after a regular symbol scan, scan the menu code to disable the Bluetooth auto-connect 'DIAU'. otherwise, the device will try to re-connect to the Bluetooth device after any normal scan.
NOW: scan all bar codes into storage.
When your application is open and ready in your host and you are in-range, scan the auto-connect menu code 'ENAU' or just hold down the trigger/scan button until you see the blue LED indicator flash - it should re-connect to the last paired device AND:
- If configured for HID mode - it will dump the data into the open application, like a keyboard entry. To have the data stream over a USB cable scan this configuration sheet.
- If in SPP mode, it will dump the data into the computer's appropriate COM port.
- If in MFi mode, it will dump the data into the appropriate iOS application program.
Downloads
Notice: The downloading and use of any Opticon software implies consent with Opticon's End User License Agreement.
Documents
| Document | Description | Version | Download |
|---|---|---|---|
| Command Reference Guide | This document contains a comprehensive list of all the serial commands used in the OPN2002i/OPN3002i/OPN3102i devices. The purpose of this document is to aid the development of applications that utilize the Opticon companion scanners/data collectors. For details regarding device use or technical information necessary for developing applications, please refer to reference documents that cover those subjects. | 1.0 | Download |
| Quick Start Guide - Bluetooth | This Quick Start Guide is ideal for those who will be pairing their OPN3102i via Bluetooth. See the Upgrade instructions on this page for details on how to update your unit. | Download | |
| Specification Manual | This document provides detailed specifications for the OPN3102i. For advanced users and system integrators only. | Download | |
| iOS toggle Menu Codes | This document contains the two bar codes necessary to enable/disable the keyboard toggle feature when paired with Apple iOS devices (iPhone, iPad, etc.). | Download | |
| iOS/iDevice SDK Help Guide | This manual is for the iDevice developer (utilizing XCode) with specific information related to the setup of the platform and also provides certain specifics of the OPN3102i Bluetooth interaction. | Ed. 1.1 | Download |
| MFi Mobile Order form | This form is a MS Word document for the iDevice developer who has obtained a "Bundle Seed ID" via the Apple provisioning portal. The developer must fill out this form and send back to Opticon support. Opticon will in turn add the information to the product plan and return a vendor "Product Plan ID" number. Then the developer may submit their application to the AppStore. | --- | Form |
| MFi Mobile Order sample form | This is a sample of the form listed above. This should help the developer in how to fill out the "Mobile Order" form. | --- | Sample PDF |
| Universal Menu Book | The Universal Menu Book is a document containing instructions and configuration options for the majority of Opticon's products. Support of the commands in this manual is product specific. A must read for System Integrators. In effect this is the User Manual for all of Opticon's products that do not have a User Manual of their own and a supplement to all others. | December 2009 | Download |
Software
| Software | Description | Version | Download |
|---|---|---|---|
| Appload | Appload Is Opticon's multi-purpose firmware update utility. It is a Windows PC application that provides the capability to download firmware onto most Opticon products. It also contains a versatile terminal interface that allows serial communication to any serial port connected to the PC (be it RS232, USB-VCP or Bluetooth-SPP). Opticon products can be queried and configured in this manner. | EAGV0186 1.86 |
Download |
| Firmware OS | This is the operating system for the OPN-3102i. | TC23J06 | Download |
| Module Firmware | This is the most recent default firmware for the MDI4xx0. | BD01J13 | Download |
| OPN iOS SDK framework | This SDK contains an example application and the OPNBluetoothKit.framework for the OPN2002i/OPN3002i devices. The purpose of this SDK is to quickly aid in the development of applications that utilize the OPN2002i and OPN3002i data collectors. This SDK is not released to the general public, but is released by request only | 1.0 | Contact Us |
Drivers
| Driver | Description | Version | Download |
|---|---|---|---|
| All-In-One PC Drivers | USB-to-serial drivers installer package for 32 and 64-bit versions of Windows XP (32-bit only), Vista 7, 8, 8.1 and 10. This package contains four drivers. The first and fourth drivers are for the Opticon cradles. The second driver is for the OPN200x scanners along with many other Opticon products. The third driver is an ATEN driver for a popular RS232 <-> USB-VCP adapter. You can choose any of the drivers to install on the first screen of the installer program. *Note: Opticon USB Drivers may not install or operate correctly if FIPS (Federal Information Processing Standards) is enabled on your host computer* | 1.615 | Download |
- Contact Us:
- In Canada, US & Mexico, contact: service@opticonusa.com
- In the rest of the world, contact: service@opticon.com
https://www.opticonusa.com/assets/documents/datasheets/OPN-3102i.pdf