| |
Batch mode will be enabled when the device is no longer connected via bluetooth. |
|
Batch mode will be enabled when the device is no longer connected via bluetooth. |
| - |
However, once reconnected, the data will begin streaming. It is recommended that you have a text editor or application open, assuming the OPN3002 is in BT-HID mode, so that the data has somewhere to go.
|
+ |
However, once reconnected, the data will begin streaming immediately. It is recommended that you have a text editor or application open, assuming the OPN3002 is in BT-HID mode, so that the data has somewhere to go.
|
| |
|
+ |
To cause the OPN3002i to wait for a button press before streaming, scan [http://opticonfigure.opticon.com/sl/?z=1c1&a=4&b=2&d=1 this configuration sheet.]
|
| |
To sever the Bluetooth connection, hold down the trigger/scan button until you hear a disconnect tone (or scan the "Manual Disconnect" scan code '+-DISC-+' - See the Universal Menu Book for the menu scan code symbols) -- This action just disconnects from the current Bluetooth host computer until it has something else to send. |
|
To sever the Bluetooth connection, hold down the trigger/scan button until you hear a disconnect tone (or scan the "Manual Disconnect" scan code '+-DISC-+' - See the Universal Menu Book for the menu scan code symbols) -- This action just disconnects from the current Bluetooth host computer until it has something else to send. |
