| Line 82: |
| |
* The NetO32 status log will indicate that the data was downloaded. |
|
* The NetO32 status log will indicate that the data was downloaded. |
| |
* Your Data File is now on the PC in the folder specified previously. |
|
* Your Data File is now on the PC in the folder specified previously. |
| |
|
|
|
| |
|
+ |
==Bluetooth Setup==
|
| |
|
|
|
| |
|
+ |
Navigate to the System Menu > Communicate > Interface and select BT Real Time
|
| |
|
+ |
Use the CLR button to back out of the Interface, Communicate, and System Menus
|
| |
|
+ |
Be sure to choose YES when asked to save settings while exiting the System Menu.
|
| |
|
|
|
| |
|
+ |
Navigate to Scan labels and press UP for SLAVE. The screen will display "Waiting Host Connection"...
|
| |
|
+ |
On your Computer/Tablet/Phone, search for the Bluetooth device OPL-9815_xxxx
|
| |
|
+ |
The scanner will ask you to confirm the PIN. Be sure to use the ENT key.
|
| |
|
|
|
| |
|
+ |
The device will be paired in HID mode. In SPP mode you will need to open the serial port to complete the pairing process.
|
| |
|
|
|
| |
|
+ |
You can change between HID and SPP mode by navigating to System Menu > Bluetooth > Set Mode
|
| |
|
+ |
Press UP for HID or DOWN for VCP/SPP.
|
| |
|
|
|
| |
==Loading Firmware== |
|
==Loading Firmware== |
| |
Follow the directions above for [[#Setting_up_the_Host|Setting up the Host]]. |
|
Follow the directions above for [[#Setting_up_the_Host|Setting up the Host]]. |
| Line 119: |
| |
* After the OS is finished programming, you can immediately drag the Application file onto Appload or choose 'File' > 'Download' and navigate to the OS firmware file to load the application. |
|
* After the OS is finished programming, you can immediately drag the Application file onto Appload or choose 'File' > 'Download' and navigate to the OS firmware file to load the application. |
| |
==Application Development== |
|
==Application Development== |
| - |
The OPL-9815 firmware is split into two levels, an Operating System and an Application. The Operating System Exposes the functions of the hardware to the Application level firmware, and the Application determines how the device behaves. The Operating System is developed and maintained solely by Opticon, however anyone can make an application for the OPL-9815 using using the [[#Software|Renesas RX compiler]]. For code samples please write [mailto:devsupport@opticonusa.com devsupport@opticonusa.com].
|
+ |
The {{{prodName}}} firmware is split into two levels, an Operating System and an Application. The Operating System Exposes the functions of the hardware to the Application level firmware, and the Application determines how the device behaves. The Operating System is developed and maintained solely by Opticon, however anyone can make an application for the {{{prodName}}} using using the [[#Software|Renesas RX compiler]]. For code samples please write [mailto:devsupport@opticonusa.com devsupport@opticonusa.com].
|
| |
|
|
|
| |
|
|
|
| - |
==Set the Time==
|
|
|
| - |
===Appload===
|
|
|
| - |
# [[#Installing_Appload|Install Drivers and Appload]]
|
|
|
| - |
# In Appload [[#Select_COM_port|Set COM Port]]
|
|
|
| - |
# In Appload select Utilites > Send time
|
|
|
| |
|
|
|
| |
|
|
|
