Version Differences for OPH1004

(→Download Data)
(→Setting Up the Host)
Line 17:
  From the main screen, click 'Tools' and then 'Options'. You can set up NetO32 to communicate using this window.    From the main screen, click 'Tools' and then 'Options'. You can set up NetO32 to communicate using this window. 
  Click 'RS232' from the left hand column. You should see a screen like the one pictured at right.[[Image:NetO32_RS232_Settings.png|thumb|RS232 Settings]]    Click 'RS232' from the left hand column. You should see a screen like the one pictured at right.[[Image:NetO32_RS232_Settings.png|thumb|RS232 Settings]] 
- #Choose the COM port where you plugged the device's cradle in.   + 1.) Choose the COM port where you plugged the device's cradle in.  
  ::This is usually COM 1, but may be different if you are using USB rather than RS232. To find your COM port, check Device Manager. Click 'Start', then 'Run', then type 'devmgmt.msc' into the popup. Click 'OK', and look under the 'Ports' section of the window that came up.    ::This is usually COM 1, but may be different if you are using USB rather than RS232. To find your COM port, check Device Manager. Click 'Start', then 'Run', then type 'devmgmt.msc' into the popup. Click 'OK', and look under the 'Ports' section of the window that came up. 
- # Change Baudrate to 115200   + 2.) Change Baudrate to 115200  
- # Change IrDA Device to 'None'   + 3.) Change IrDA Device to 'None'  
       
  Next, choose 'Download' from the menu at left. You should see a screen like the one pictured at right.[[Image:NetO32_Download_Sets.png|thumb|Download Settings]]    Next, choose 'Download' from the menu at left. You should see a screen like the one pictured at right.[[Image:NetO32_Download_Sets.png|thumb|Download Settings]]