Version Differences for OPH1004

(→Starting the Upload from your OPH1004)
(→Setting Up the Host)
Line 10:
  ===Setting Up the Host===    ===Setting Up the Host=== 
  To use NetO communications on a PC you need an application called NetO32. This can be downloaded from the Downloads table at the bottom of this page. Simply run the installer after download is complete and follow the setup instructions here.    To use NetO communications on a PC you need an application called NetO32. This can be downloaded from the Downloads table at the bottom of this page. Simply run the installer after download is complete and follow the setup instructions here. 
       
    + [[Image:NetO32_Main_Window.png|thumb|The NetO32 Main Window.]]  
  * Select 'Tools' > 'Options'    * Select 'Tools' > 'Options' 
  ** Choose RS232 from the menu at left    ** Choose RS232 from the menu at left 
    +  
    +  
Line 16:
- *** Change IrDA Device to 'None'   + *** Change IrDA Device to 'None'[[Image:NetO32_RS232_Settings.png|thumb|Changing the RS232 Settings.]]  
  ** Choose 'Download' from the menu at left    ** Choose 'Download' from the menu at left 
- *** Click the 'browse' folder icon at right to change the destination folder of the file once you have downloaded it.   + *** Click the 'browse' folder icon at right to change the destination folder of the file once you have downloaded it.[[Image:NetO32_Download_Sets.png|thumb|Choosing where to put the downloaded data.]]  
  *** Choose between 'Append', 'Overwrite', and 'Unique' to determine what happens when you download a data file but a file by that same name is already present.    *** Choose between 'Append', 'Overwrite', and 'Unique' to determine what happens when you download a data file but a file by that same name is already present. 
  ** Click 'OK'    ** Click 'OK' 
Line 23:
  ** Now every time after this that you open NetO32 you must select 'File' > 'Open' and choose this file to load your settings.    ** Now every time after this that you open NetO32 you must select 'File' > 'Open' and choose this file to load your settings. 
  * Select 'Protocol' > 'Start'    * Select 'Protocol' > 'Start' 
- NetO32 is now in 'Polling' mode. Note that you should see the yellow light on the cradle blinking steadily. This means it will sit here indefinitely sending queries to the cradle and waiting for the right response to start a download. Multiple downloads can all be done without ever closing NetO32. When you are done using NetO32 simply select 'Protocol' > 'Stop' and NetO32 will discontinue polling mode. The application can then be closed.   + NetO32 is now in 'Polling' mode. Note that you should see the yellow light on the cradle blinking steadily. This means it will sit here indefinitely sending queries to the cradle and waiting for the right response to start a download. Multiple downloads can all be done without ever closing NetO32. When you are done using NetO32 simply select 'Protocol' > 'Stop' and NetO32 will discontinue polling mode. The application can then be closed.[[Image:NetO32_Downloaded.png|thumb|The circle in the Main Window will flash different colors while NetO32 is in polling mode. NetO32 will tell you when it has finished downloading the data file from the device.]]  
       
  ===Starting the Upload from your OPH1004===    ===Starting the Upload from your OPH1004===