Version Differences for OPH1004 - Opticon Technical Support Portal

===Starting the Upload from your OPH1004===

After NetO32 is in Polling mode (see above) follow these steps. First, of course, it is expected that you will have scanned some barcodes using the OPH1004.

-

* Select 'Send Data' from the main menu (use the arrow keys to move up and down and trigger (center key) to select an option.

+

* Select 'Transmit Data' from the main menu (use the arrow keys to move up and down and trigger (center key) to select an option.

-

* The screen that appears should say "Transmit Data via Cradle NETO Protocol -PRESS ANY KEY-'. Press any key.

+

* The screen that appears should say "Transmit Data NETO Protocol.

-

* The unit will change to say 'Sending File Waiting NetO Connection ...'. At this point simply place the unit on the cradle.

+

* NetO32 status log will indicate that the data was downloaded and the OPH1004 will go back to the main menu transmit data screen.

-

* The OPH1004 will emit a series of short beeps and display 'File Was Sent. Delete Data File?'. Choose either YES or NO by pressing the appropriate arrow button below the display. The unit will now be back at the startup splash screen.

* Your Data File is now on the PC in the folder specified previously.

 ===Starting the Upload from your OPH1004===
 After NetO32 is in Polling mode (see above) follow these steps. First, of course, it is expected that you will have scanned some barcodes using the OPH1004.
-								* Select 'Send Data' from the main menu (use the arrow keys to move up and down and trigger (center key) to select an option.
+								* Select 'Transmit Data' from the main menu (use the arrow keys to move up and down and trigger (center key) to select an option.
-								* The screen that appears should say "Transmit Data via Cradle NETO Protocol -PRESS ANY KEY-'. Press any key.
+								* The screen that appears should say "Transmit Data NETO Protocol.
-								* The unit will change to say 'Sending File Waiting NetO Connection ...'. At this point simply place the unit on the cradle.
+								* NetO32 status log will indicate that the data was downloaded and the OPH1004 will go back to the main menu transmit data screen.
-								* The OPH1004 will emit a series of short beeps and display 'File Was Sent. Delete Data File?'. Choose either YES or NO by pressing the appropriate arrow button below the display. The unit will now be back at the startup splash screen.
 * Your Data File is now on the PC in the folder specified previously.