Version Differences for OPH1004 - Opticon Technical Support Portal

==Downloading Data Files==

-

All of Opticon's Demo Applications for the OPH1004 support downloading of data through Opticon's proprietary protocol called NetO (Net-Oh). As with all communications there are two sides. In this case these are the terminal (the OPH1004) and the host (usually a PC). In most situations the terminal is used to collect data by scanning barcodes. This barcode data is then downloaded to the PC where third-party software uses it to automate various activities.

+

All of Opticon's Demo Applications for the OPH1004 support downloading of data through Opticon's proprietary protocol called [[NetO]] (Net-Oh). As with all communications there are two sides. In this case these are the OPH1004 and the host, a PC. In most situations the terminal is used to collect data by scanning barcodes. This barcode data is then downloaded to the PC for processing.

-

This section covers setting up and using such a communication channel.

+

This section covers setting up and using [[NetO32]], our application for sending and receiving data using the NetO protocol.

-

To use NetO communications on a PC you need an application called NetO32. This can be downloaded from the Downloads table at the bottom of this page. Simply run the installer after download is complete and follow the prompts. When it is complete, start the NetO32 application on your computer. You will be presented with a main screen and some options menus.

+

NetO32 can be downloaded from the [https://wiki.opticonusa.com/techsupport/en/OPH1004#Software Downloads Table]. Simply run the installer after download is complete and follow the prompts. When it is complete, start the NetO32 application on your computer. You will be presented with a main screen and some options menus.

===Starting the Upload from your OPH1004===

-

[[Image:OPH_1004_Download_Data.jpeg|thumb|x400 px|Transmit Data.]]

+

[[Image:OPH_1004_Download_Data.jpeg|thumb|x200 px|Transmit Data.]]

After NetO32 is in Polling mode (see above) we are ready to download data from the OPH-1004.

# Select 'Transmit Data' from the main menu by using the arrow keys to move up and down and Scan to select an option. The correct option is pictured at right.

 ==Downloading Data Files==
-								All of Opticon's Demo Applications for the OPH1004 support downloading of data through Opticon's proprietary protocol called NetO (Net-Oh). As with all communications there are two sides. In this case these are the terminal (the OPH1004) and the host (usually a PC). In most situations the terminal is used to collect data by scanning barcodes. This barcode data is then downloaded to the PC where third-party software uses it to automate various activities.
+								All of Opticon's Demo Applications for the OPH1004 support downloading of data through Opticon's proprietary protocol called [[NetO]] (Net-Oh). As with all communications there are two sides. In this case these are the OPH1004 and the host, a PC. In most situations the terminal is used to collect data by scanning barcodes. This barcode data is then downloaded to the PC for processing.
-								This section covers setting up and using such a communication channel.
+								This section covers setting up and using [[NetO32]], our application for sending and receiving data using the NetO protocol.
-								To use NetO communications on a PC you need an application called NetO32. This can be downloaded from the Downloads table at the bottom of this page. Simply run the installer after download is complete and follow the prompts. When it is complete, start the NetO32 application on your computer. You will be presented with a main screen and some options menus.
+								NetO32 can be downloaded from the [https://wiki.opticonusa.com/techsupport/en/OPH1004#Software Downloads Table]. Simply run the installer after download is complete and follow the prompts. When it is complete, start the NetO32 application on your computer. You will be presented with a main screen and some options menus.
 ===Starting the Upload from your OPH1004===
-								[[Image:OPH_1004_Download_Data.jpeg|thumb|x400 px|Transmit Data.]]
+								[[Image:OPH_1004_Download_Data.jpeg|thumb|x200 px|Transmit Data.]]
 After NetO32 is in Polling mode (see above) we are ready to download data from the OPH-1004.
 # Select 'Transmit Data' from the main menu by using the arrow keys to move up and down and Scan to select an option. The correct option is pictured at right.