MSL1000

The Opticon MSL1000 is a small form factor undecoded laser barcode scan engine. This low-profile scan engine is ideal for custom scanning applications including scanning non-standard barcodes. The MSL1000 is a fit for security systems, mobile devices, medical or diagnostic equipment or kiosks. This small form factor scan engine features a 650 nm visible laser diode that scans bi-directionally at a rate of 100 scans/second.


Interface Connector Pinouts

10-Pin Connector Pinout
Signals Pin No. I/O Description of Function
VCC Pin 1 - - - Power Supply: Typical: 3.3V
LASER EN Pin 2 Input C-MOS Logic Level for Laser Control (ON/OFF: High = ON, Low = OFF)
POWER EN Pin 3 Input C-MOS Logic Level for Power Supply (ON/OFF: High = ON, Low = OFF)
SIGNAL Pin 4 Output C-MOS Logic Level for Logic Output of Bar Code Image: (High = Bars, Low = Spaces
TIMING Pin 5 Output C-MOS Logic Level for Synchronously-scanned Output: (High = Left to Right, Low = Right to Left)
POLARITY Pin 6 Input C-MOS Logic Level for Selecting Signal Polarity: (High = Reversed Symbol, Low = Normal)
Filter SEL 1 Pin 7 Input C-MOS Logic Level for Selecting Analog Processing Filter
Filter SEL 2 Pin 8 Input SEL1/2 (00 = Standard Mode, 01 = Mode 1, 10 = Mode 2, 11 = Mode 3)
TEST Pin 9 Input Set to Low or Open
GND Pin 10 - - - Ground


Connector used was produced by KYOCERA ELCO Corp. Product No. 04 6238 010 010 883+ 10 PIN, 0.5mm Pitch, FCC Connector (Bottom Contact)


Downloads

Documents

Document Description Version Download
DataSheet Technical details at a glance. Download