View source for PX35

==About==
See [https://www.opticonusa.com/products/handheld-solutions/px35.html here] for general information about the PX35.

==Device Instructions==
===Firmware Loading===
The following process is used to load firmware onto the PX35. Firmware for the PX35 is divided into three parts: the Bootloader, the OS and an Application file. All three pieces use the same instructions for loading, the only part that changes is the actual file you load. See the downloads section for all available files.
* Setup and attach the cradle to the PC with which you will be loading firmware onto the device.
* On the PX35 press together the three button below the display (UP, DOWN, and TRIGGER). This will enter the OS' System Menu.
* Select the option to download Appl.
* Select IrDA from the second menu.
* Place the PX35 in the cradle (top down as always).
* Using Appload select 'Settings' > 'Port' and choose the COM port the cradle is connected to.
* Using Appload select 'File' > 'Download' and choose the file you wish to load.
* Wait until Appload reports success, you can now remove the PX35 from the cradle.

==Development==
The PX35 firmware is split into two levels, an Operating System and an Application.  The Operating System Exposes the functions of the hardware to the Application level firmware, and the Application determines how the device behaves.  The Operating System is developed and maintained solely by Opticon, however anyone can make an application for the PX35 using using Opticon's [[C-Library Kit]] and the included GCC WinArm Compiler. 

==Bluetooth Real Time Scanning==
If you are looking to use the PX35 in a bluetooth real-time scanning mode then you will want to [[#Firmware_Loading|load Application  [[#Downloads|XFF3668_]] on the product.  

If possible request this at the time of order so our production department can do this for you.
==Downloads==

{{EULA Block}}

===Documents===

{{DT Header|Document}}
|-
|Quick Start Guide - Generic || This is the QSG that comes in the box.
| class="center" | 
| class="center" | [https://files.opticonusa.com/PX35/Documents/PX35_quick_start_quide_en.zip Download]
|-
|User Manual || This manual contains detailed information regarding the PX35 hardware, charging methods, accessories, and other more generic details.
| class="center" | 
| class="center" | [https://files.opticonusa.com/PX35/Documents/PX-35manual.doc Download]
|-
|Application Manual XFF3560x || This manual is intended to assist the end user in using the default application when loaded on the PX35.
| class="center" | 
| class="center" | [https://files.opticonusa.com/Downloads/PX35%20Application%20Manual%20XFF3560x.pdf.zip Download]
|-
|Application Manual XFF3092x || This manual is intended to assist the end user in using the OPL972x default application when loaded on the PX35.
| class="center" | 
| class="center" | [https://files.opticonusa.com/Downloads/PX35%20Application%20Manual%20XFF3092x.pdf.zip Download]
|-
|Application Manual XFF3668x || This manual is intended to assist the end user in using the Bluetooth application when loaded on the PX35.
| class="center" | 
| class="center" | [https://files.opticonusa.com/Downloads/PX35%20Application%20Manual%20XFF3668x.pdf.zip Download]
|-
|Application Manual XFF3669x || This manual is intended to assist the end user in using the Image Capture application when loaded on the PX35.
| class="center" | 
| class="center" | [https://files.opticonusa.com/Downloads/PX35%20Application%20Manual%20XFF3669x.pdf.zip Download]
|-
|DataSheet || Technical details at a glance. 
| class="center" | 
| class="center" | [https://files.opticonusa.com/PX35/Documents/leaflet_PX35-INC.pdf Download]
|-
{{DTR UMB}}
|-
{{Table End}}

===Software===

{{DT Header|Software}}
|-
{{DTR Appload}}
|-
{{DTR NetO32}}
|-
| Firmware: OS || This is the latest Operating System firmware file for the PX35. 
| class="center" | XBFV0213
| class="center" | [https://files.opticonusa.com/Downloads/XBF3542.zip Download]
|-
| Firmware: Application - USA Standard XFD3092_ || This is the standard application running on all PX35s from our warehouse. It supports a large variety of barcode symbologies (which ones are configurable). Data is stored as a database including the barcode data scanned, the number of times that barcode has been scanned (with optional user quantity input) and the date and time the last entry was updated). This application is similar to the application running on our OPL97__ data collectors.  Note: bluetooth capabilities have not been added to this application.  
| class="center" | XFD3092I
| class="center" | [https://files.opticonusa.com/Downloads/XFD_3092.zip Download]
|-
| Firmware: Application - USA Standard || This is the old standard application. This application is intended to demonstrate the features and functions of the PX--35 in an inventory--style scenario. With this scenario in mind the PX--35 (with this application installed) behaves in very specific ways as detailed in the manual for this applicaiton.
| class="center" | XFF35600
| class="center" | [https://files.opticonusa.com/Downloads/XFF3560x.zip Download]
|-
| Firmware: Application - Bluetooth || This application allows the user to connect as a HID or SPP, master or slave using Bluetooth.
| class="center" | XFF36682
| class="center" | [https://files.opticonusa.com/Downloads/XFF3668.zip Download]
|-
| Firmware: Application - Camera || An application which takes a picture on the PX35. And save this image on the hard drive and transmit it using Net0.
| class="center" | XFF36690
| class="center" | [https://files.opticonusa.com/Downloads/PX35_Camera_Application_XFF3669_.zip Download]
|-
{{Table End}}

===Drivers===

{{DT Header|Driver}}
|-
{{DTR USB Drivers AllInOne PC}}
|-
{{Table End}}
[[Category:PX]]