View source for MDL1000

==About==
The Opticon MDL1000 is a laser barcode scan engine with an extremely small rectangular form factor. This laser scan engine is ideal for space-constrained portable devices. OEMs needing to add laser scanning capability to smartphones, medical devices, diagnostic equipment or kiosks will streamline their design process with this tiny engine: the small size makes it easy to mount. The MDL1000 scan engine features a 650 nm visible laser diode that scans bi-directionally at a rate of 100 scans/second.


[https://www.opticonusa.com/products/oem-solutions/mdl-1000.html Product Page]


==How To==
===Restore Default Settings===
* [https://opticonfigure.opticon.com/sl/?z=AQ-1&a=4&b=0&d=1 USB COM Port]: Use this sheet if you have a USB interface and you are running software which requires a COM port to receive data from the scanner.
* [https://opticonfigure.opticon.com/sl/?z=ki-1&a=4&b=0&d=1 USB Keyboard]: Use this sheet if you have a USB interface and you would like the flexibility of scanning wherever your keyboard cursor is on your screen.
* [https://opticonfigure.opticon.com/sl/?z=kZ-1&a=4&b=0&d=1 RS232]: Use this sheet if you have an RS232 interface.
* [https://opticonfigure.opticon.com/sl/?z=l8-1&a=4&b=0&d=1 Keyboard Wedge]: Use this sheet if you have a Keyboard Wedge interface. Do not scan this sheet if you have a USB or RS232 interface.
===Configure the Scanner===
The output of this barcode reader can be modified in several different manners. Using several different tools.  The following tools are available for you to use in configuring your scanner.  Please submit a ticket above for assistance from Opticon's Technical Support Team.
====[[Universal Menu Book]]====
The [[Universal Menu Book]] (UMB) is a PDF document that enabled you to change the most commonly changed settings on Opticon's scanners.  The UMB also contains information about what the various settings do when they are enabled.  The UMB covers the following topics.
* Interface Specific Settings
* Code Opticons
** Barcode Symbology Settings
** Enabling/Disabling Symbologies
* String Options
** Prefixes / Suffixes
** Preambles / Postambles
* Read Options- Adjusting General Behaviors like:
** Disable Trigger (Always On)
** Single Read Mode / Multiple Read Mode
* Indicator Opticons
** Buzzer Settings
** LED Settings
====[[OptiConfigure]]====
Opticonfigure serves primarily as a an online searchable Universal Menu Book (UMB), however it does have some notable differences.  Opticonfigure is updated more frequently than the UMB.  Opticonfigure also contains some menu options that were excluded from the UMB for the sake of brevity.  Although more inclusive, Opticonfigure doesn't do as good of presenting information in an organized and comprehensible manner as the UMB does. 
Opticonfigure allows you to:
Create and print custom configuration sheets.
Create custom configuration sheets and save them as PDF files.
Create custom configurations and export OCG files.
Create DataWizard configuration sheets.

====[[DataWizard]]====
Data Wizard allows you to modify barcode data before transmission. Currently it is able to add or remove characters, adjust the length of the output data, and remove entire sections of the barcode prior to transmission. Commonly each configuration will be designed to match different sizes, symbologies, or characters in barcode data. So for example if a user wants to truncate a Code-39 barcode of a specific length, but add characters to a Code 128 barcode, you wold make two configurations.
==Firmware Loading==
Follow the directions below to load firmware on to the MDL1000.

===Preparation===
# Download the Firmware: for this process available in the [[#Software|Software Downloads]] section.
# Extract the MDL1000 Firmware zip file, the Appload.zip file, the USB Drivers Installer.zip file, into a convenient folder.
# Install [[Appload]] by double-clicking the 'Appload Setup.exe' file, which will start the install wizard. The defaults are fine in most cases, so keep clicking 'Next' until you are finished. Appload will launch at the end of the install process.
# Connect the MDL1000 to your PC
===Install the Firmware===
# Launch Appload if it is not already running.
# We first need to choose the correct COM port. From the main Appload window, select 'Settings' > 'Port', then choose the COM number associated with the serial port the MDL1000 is connected to.
# Now we can start downloading Firmware. Please choose 'File', then 'Download', then navigate to and select the firmware file. You should see the words 'Initializing IRdA' and then a progress indicator if this is working.
# When complete, the device will need to be power cycled. The MDL1000 can then be configured using standard menu configuration codes as desired.


==Downloads==

{{EULA Block}}

===Documents===

{{DT Header|Document}}
|-
|MDL1000 Integration Guide|| This guide is intended to aid engineers that intend on integrating the MDL1000 into their products. 
| class="center" | 
| class="center" | [https://files.opticonusa.com/MDL/MDL1000/Documents/MDL1000%20Windows%20Integration%20Guide%20-%20102005.pdf Download]
|-
| MDL1000 Specification Manual || This document provides detailed specifications for the MDL1000 
| class="center" | 
| class="center" | [https://files.opticonusa.com/MDL/MDL1000/Documents/MDL1000%20%20(SS06023)%20v3%20Specification%20Manual%20A4.pdf Download]
|-
|DataSheet || Technical details at a glance. 
| class="center" | 
| class="center" | [https://www.opticonusa.com/assets/documents/datasheets/Opticon%20MDL-1000_Datasheet.pdf Download]
|-
{{DTR UMB}}
|-
{{Table End}}

===Software===

{{DT Header|Software}}
|-
{{DTR Appload}}
|-
{{DTR MDL1000 FW}}
|-
{{Table End}}

===Drivers===

{{DT Header|Driver}}
|-
{{DTR USB Drivers AllInOne PC}}
|-
{{Table End}}

[[Category:OEM]]
[[Category:MDL]]