Gen 1 - For MDI-1x00 / MDI-2x00 products {OLD FORMAT}. See Take Picture Gen 2 for the newest format.

About

Take Picture is a Windows Application that allows the user to take a picture using many of Opticon's 2D imager barcode scanners.

Download

Notice: The downloading and use of any Opticon software implies consent with Opticon's End User License Agreement.

The MDI2000-2300 Picture command guide can be downloaded here.

Take picture PC application can be downloaded here

The MDI1000/OPI2002 Picture Commands Guide can be downloaded here

Instructions

To use take picture follow the instructions below:

• Download and install Take Picture from the link above.
• Connect your favorite 2D imager barcode scanner or scan engine to your computer.
• Make sure the scanner is connected via RS232 or is in USB-VCP mode.
• Open take picture.
• Select the appropriate com port under Settings-> Port.
• Select File->Take Picture.
• Pull the trigger of the scanner.
• Note: the picture doesn't save automatically, you have to select save.

Compatibility

Take picture is not compatible with all scanners nor is it compatible with all firmware versions.