Drivers

Windows


All In One USB Drivers

Opticon distributes the below signed USB serial driver installer package. This installer is intended to work on both 32 and 64 bit versions of the following operating systems:

NOTE: *Opticon USB Drivers may not install or operate correctly if FIPS (Federal Information Processing Standards) is enabled on your host computer*


This package contains 4 drivers. The 1st and 4th drivers are for the Opticon cradles. The 2nd driver is for the OPN200x scanners along with many other Opticon products. The 3rd driver is an ATEN USB converter cable driver. You can choose any of the drivers to install on the first screen of the installer program.

FAQ

Basic information regarding the USB-COM Interface.
Item Explanation Notes
Transfer Rate Full Speed USB 2.0 (FS Mode) |
Power Requirement 500mA Varies from actual Power Consumption.
Fixed COM number Fixing of specific COM number is possible. Default: not fixed


Is there a silent installer?
The below linked driver installer will run silently if called with /SILENT=YES


USB Driver VID/PIDs
(VID) - 065A Optoelectronics Co., Ltd
(PID)s
0001 Opticon OPR-2001 / NLV-1001 (keyboard mode)
0009 NLV-1001 (serial mode) / OPN-2001 [Opticon]
A002 MDI-4xxx Products: NLV-5201 / L-46X / FDI-4100 (VCP/serial mode)
A001 MDI-4xxx Products: NLV-5201 / L-46X / FDI-4100 (HID – Keyboard Mode)
Other

Driver is also CDC-ACM Compliance, but product must be configured to use this version of the driver. (scanned menu code/serial configured). [Communication Device Class (CDC) Abstract Control Model (ACM) USB Devices]

Undocumented Commands to choose what USB driver gets loaded

[EG9Q0Z2: Default (Opto driver)
[EG9Q1Z2: Microsoft CDC driver (Windows10)



Downloads

Notice: The downloading and use of any Opticon software implies consent with Opticon's End User License Agreement.

Drivers

Description Version Download
All-In-One PC Drivers USB-to-serial drivers installer package for 32 and 64-bit versions of Windows XP (32-bit only), Vista 7, 8, 8.1 and 10. This package contains four drivers. The first and fourth drivers are for the Opticon cradles. The second driver is for the OPN200x scanners along with many other Opticon products. The third driver is an ATEN driver for a popular RS232 <-> USB-VCP adapter. You can choose any of the drivers to install on the first screen of the installer program. *Note: Opticon USB Drivers may not install or operate correctly if FIPS (Federal Information Processing Standards) is enabled on your host computer* 1.615 Download