PHL8xxx

Revision as of 11 April 2011 10:56 by Jleiseth (Comments | Contribs)
PHL8xxx.jpg
PHL8xxxscan.jpg
PHL8xxx in cradle.jpg

Timeline

  • The PHL8112 should be available in August.

Summary

The PHL8000 is the successor to the PHL7xxx Series. It will be manufactured by SCC and will have a much smaller form factor. Working samples are available now, but the design will change in the near future. It will run Windows CE 5.0. The PHL 8000s series feature an integrated 1D engine and a full 3.5" TFT display, a numeric or aphanumeric (full ) keypad. The PHL 8000 meets IP 54 standards. The unit unit comes with a 2000mAh battery pack or can use the optional 4000mAh high capacity battery.

Communications

  • The PHL8000 will utilize the Summit MCF10G CCX v4 WLAN module. W-LAN 802.11 b/g
  • Bluetooth communication (Class II)
  • GSM/GPRS: optionally built in GSM/GPRS/EDGE module, quad band.

Part Number Format

PHL-8xyz

PHL-8000 Part Number Format
x y z
0
1 Numeric Keypad MDL-1000 (1D) WLAN
2 Alpha-Numeric Keypad WLAN + BT
3
4 WLAN + BT + GPRS
5 MDI-1000 (2D) BT
6 R10 (2D) WLAN + BT-47
7 WLAN + BT-47 + GPRS
8 BT-47

Cradle

The cradle for the PHL-8000 is the IRU8000

Warm Reboot

With the stylus press the reset switch on the back of the unit.

Cold Boot

While holding the power button: use the stylus to press the reset switch on the back of the unit.

SD Card Compatibility

The PHL-8000 is known to work with at least 16GB SDHC cards (tested with Kingston 16GB microSD card with adapter).

Models and Options

PHL8112 W-LAN, Bluetooth, 1D barcode scanner, numeric keypad

PHL8114 W-LAN, Bluetooth, 1D barcode scanner, numeric keypad, GSM/GPRS/EDGE

PHL8212 W-LAN, Bluetooth, 1D barcode scanner, alphanumeric keypad

PHL8214 W-LAN, Bluetooth, 1D barcode scanner, alphanumeric keypad, GSM/GPRS/EDGE