PHL2700

PHL2700 in cradle

Add content

OS loading

• Cradle baud rate must be set to 115200 (Dip switches:1 ON, 2 OFF, 3 OFF, 4 OFF, 5 ON, 6 ON)
• With device powered off press [S] + [ENT] + [SCAN] + [PW] - this is a special mode

  Note: Device display will be blank excepting icons along bottom will be darkened

• Appload IrDA Adapter/Cradle type must be set to 'Tekram compatible'
• Drag and drop OS file (i.e. CBWV0155.HEX)

Application Loading

• Cradle baud rate must be set to 19200 (Dip switches::1 ON, 2 OFF, 3 OFF, 4 OFF 5 OFF 6 ON)
• With device powered off press [0] + [7] + [PW] - this enters the system menu
• Scroll to 'Download Appl' and press [ENT]
• Scroll to 'Via cradle' and press [ENT]
• Appload IrDA Adapter/Cradle type must be set to 'Tekram compatible'
• Drag and drop Application file (i.e. CFW20230.S2)

Diagnostic Tool

• With device powered off press [0] + [7] + [PW] to go into the system menu.
• Scroll down to diagnostics( #4) and press enter.

The system should pop up a splash screen for this device. Press any key and follow the instructions on the screen until the diagnostics are completed.

Note: These diagnostics do not test the charging circuit, the IR, or the RS232 parts of the device. Those will need to be tested by either updating the OS through these functions or downloading data using the Opticon Standard Demo. The Charging Circuit can be tested by placing a device with the standard rechargeable battery onto a cradle. At that point a red light should turn on indicating the unit is charging.

Downloading Data

• Data can be downloaded via cradle and cable.

RapidGen

This device supports application developed with RapidGen. More details to come.

TODO: more info

Note:

• USA part number:PHLTRM80B-00
• JPN:PHL-2600-40

Cradle

The PHL-2700 uses a data communication cradle to transmit to the PC. This cradle is model number IRU-2700-00 which uses power supply 32-00904-00.

Dip Switches