OPN2003

Revision as of 01 December 2010 16:35 by jschurr (Comments | Contribs) | (added Upgrading section)

Downloads


Notice
The downloading and use of any Opticon software implies consent with Opticon's End User License Agreement.

Supported Platforms

Setup & Configuration

Usage

Upgrading

While there are multiple components to the firmware on an OPN-2003 (Bootloader, OS and Application) the instructions to load them individually or all together are the same. You simply choose the appropriate file(s) during the right part in the process. All files available from Opticon are found in the Downloads section of this page. In addition to the individual files there are also combination files which are all three components bundled together into a single file for easy installation. It is recommended to use these combination files. As the Bootloader and OS files will always be the same you simply choose the combination file for the application you wish to load.

  • Bootloader files are provided by Opticon and always follow the naming convention beginning with RAFV (e.g. RAFV0306.hex).
  • OS files are provided by Opticon and always follow a naming convention beginning with RBFV (e.g. RBFV0217.hex).
  • Application files are provided by Opticon but could also be provided by a reseller, distributor or developed on ones own by using the freely downloadable SDK (See the downloads section). If provided by Opticon the application files will almost always follow a naming convention beginning with RFF (e.g. RFF35106).
  1. Download necessary files.
    • Firmware: This would be either the Bootloader, OS, Application or combination file from the Downloads section.
    • Appload: This is the loader program for the PC that installs the firmware file onto the unit. See the download section.
    • USB Drivers: These drivers are necessary so that Windows will provide a COM port that Appload needs to communicate with the device. Both 32 bit and 64 bit versions are found in the downloads section.
  2. Install USB Drivers (If you need assistance with this please contact Opticon Technical Support by e-mail at support@opticonusa.com or by phone at 1.800.636.0090 x2127).
  3. Install Appload
    • Unzip the file Appload EAGV0142.zip by right-clicking and selecting 'Extract All'
    • double-click the resulting file 'Appload Setup.exe' which will start the install wizard. You may need to select 'next' a few times and are allowed to choose the install folder and whether Appload places an icon on your desktop. You may simply choose the defaults for all options. Appload will launch at the end of the install process.
  4. Connect the OPN-2003 to your PC
  5. Install the firmware
    • Launch Appload (if it is not already running).
    • select 'Settings' > 'Port' > choose the port that says 'Opticon USB Code Reader(1D)'
    • select 'Settings' > 'IrDA Adapter/Cradle type' > 'Not installed'
    • select 'File' > 'Download' > browse to the firmware file downloaded in step 1 and select it.
  6. When complete the OPN-2003 will emit a series of beeps and reboot. When the LED is steady RED (indicating charging) or GREEN (indicating fully charged) the process is complete and you may disconnect your OPN-2003 from the PC. instruction manuals for the various applications are available for download in the Downloads section.

SDK

FAQ

OS Release Log

Links