PX-100
The PX-100 is a 1D CCD mobile barcode scanner that utilizes a smartphone or tablet to scan barcodes. The PX-100 uses the PX-100 mobile application to scan barcodes and configure the scanner to control readability options as well as the prefix and suffix.
Initial Setup:
To Use on iOS:
- Download the iOS application PX-100 Terminal from the App Store on your device
- Launch the PX-100 application
- Plug the 3.5mm audio jack into the headphone port on the device
- Press "OK"
To Use on Android:
- Download the Android application PX-100 Terminal from the Google Play Store Located here:
- Launch the PX-100 Terminal application
- Plug the 3.5mm audio jack into the headphone port on the device
- Press "OK"
Charging:
To charge the PX-100, plug the micro usb cable into the micro usb port. The charge indicator will turn RED while it's charging. When the RED indicator disappears the device is fully charged.
Downloads
Documents
| Document | Description | Version | Download |
|---|---|---|---|
| Datasheet | Technical details at a glance. | Download |
Software
| Software | Description | Version | Download |
|---|---|---|---|
| Appload | Appload Is Opticon's multi-purpose firmware update utility. It is a Windows PC application that provides the capability to download firmware onto most Opticon products. It also contains a versatile terminal interface that allows serial communication to any serial port connected to the PC (be it RS232, USB-VCP or Bluetooth-SPP). Opticon products can be queried and configured in this manner. | EAGV0186 1.86 |
Download |
| Firmware: OS | This is the Operating System firmware for the PX-100. The program utility Appload (see above) is required for loading the OS onto the PX-100. | TC20J01 | Download |