PHL8xxx

Revision as of 20 June 2011 09:49 by jschurr (Comments | Contribs)
PHL8xxx.jpg
PHL8xxxscan.jpg
PHL8xxx in cradle.jpg

Summary

It runs Windows CE 5.0. The PHL 8000s series feature an integrated 1D engine and a full 3.5" TFT display, a numeric or aphanumeric (full ) keypad. The PHL 8000 meets IP 54 standards. The unit unit comes with a 2000mAh battery pack or can use the optional 4000mAh high capacity battery.

Communications

  • The PHL8000 will utilize the Summit MCF10G CCX v4 WLAN module. W-LAN 802.11 b/g
  • Bluetooth communication (Class II)
  • GSM/GPRS: optionally built in GSM/GPRS/EDGE module, quad band.

Part Number Format

PHL-8xyz

PHL-8000 Part Number Format
x y z
0
1 Numeric Keypad MDL-1000 (1D) WLAN
2 Alpha-Numeric Keypad WLAN + BT
3
4 WLAN + BT + GPRS
5 MDI-1000 (2D) BT
6 R10 (2D) WLAN + BT-47
7 WLAN + BT-47 + GPRS
8 BT-47

Cradle

The cradle for the PHL-8000 is the IRU8000

Warm Reboot

With the stylus press the reset switch on the back of the unit.

Cold Boot

While holding the power button: use the stylus to press the reset switch on the back of the unit.

SD Card Compatibility

The PHL-8000 is known to work with at least 16GB SDHC cards (tested with Kingston 16GB microSD card with adapter).

Scanner Firmware Upgrade

The barcode scanner inside the PHL8xxx runs its own firmware independent of that running Windows. Consequently this firmware can be upgraded should it become necessary.

  • Download the latest firmware for your device from the Downloads table below.
  • Unzip and copy the firmware file to the PHL-8112 either via SD card or over an ActiveSync (or Windows Mobile Device Center) connection.
  • Double-tap the barcode icon at the bottom of the screen.
  • Tap the 'Firmware Upgrade' tab
  • Tap 'Open' and browse to the firmware file you have copied to the device.
  • Tap 'Upgrade'. Select 'Yes' when prompted.
  • The process is complete when you see the message 'Firmware update completed'
Note, this same process can be used to downgrade the firmware as well as upgrade. Simply select the appropriate firmware file.

Models and Options

PHL8112 W-LAN, Bluetooth, 1D barcode scanner, numeric keypad

PHL8114 W-LAN, Bluetooth, 1D barcode scanner, numeric keypad, GSM/GPRS/EDGE

PHL8212 W-LAN, Bluetooth, 1D barcode scanner, alphanumeric keypad

PHL8214 W-LAN, Bluetooth, 1D barcode scanner, alphanumeric keypad, GSM/GPRS/EDGE

Downloads


Notice
The downloading and use of any Opticon software implies consent with Opticon's End User License Agreement.

Software

Document Description Download
MDL1000 Firmware This is the scan engine firmware for any laser model PHL8xxx. Download