OPN2002

Revision as of 29 July 2010 14:02 by Administrator (Comments | Contribs) | (→FAQ)

FAQ

I'm trying to connect the OPN2002 to my Mac in VCP mode, but I can't seem to get the pairing to complete.

So Unix machines - which is what a Mac essentially is - have their serial ports implemented in a different way, from what you might be used to with a Windows PC. When a serial device is connected to the Mac, and the kernel is able to map a valid kernel driver to it, a POSIX device file is created under /dev/ for that serial port. After that, programs can read and write to this file, which becomes the same thing as reading and writing from a serial port. Windows uses a similar concept with COM (serial) ports, just implemented slightly differently.

Now, when you connect the OPN2002 to the Mac using Bluetooth VCP (SPP), one of these POSIX device files is created in /dev/. To finish the initial connection, that file must be opened with some program - namely yours. To test this yourself, you can use the Terminal program, and run the 'cat' command against the new file that was created under /dev/ while the pairing process was taking place. After that, the initial pairing should complete successfully.