OPI3301

OPN2002

About

The OPI3301 is an ultra-lightweight Bluetooth™ CMOS imager that reads 1D or 2D barcodes for healthcare, retail, point-of-sale (POS), inventory or logistics applications. The OPI3301 uses LEDs for lighting and features a red laser spot for aiming. Disinfectant-ready plastic makes this scanner ideal for Healthcare applications. The CRD3301 is required for charging.

Interface types

Connecting the OPI3301 directly to a third party bluetooth device is not currently supported.

Cabled USB-HID from the CRD3301

Keyboard Emulation allows any barcode scanned to be transmitted directly to the cursor on the host computer.

1. Print this barcode sheet and scan the label using your OPI3301.
2. Connect the CRD3301 to your computer using a USB cable.
3. Scan the Quick Connect Code on the bottom of the CRD3301. The OPI3301 should chirp, and a solid blue light will appear on the cradle to indicate a good connection.
4. Allow a minute for the cradle to be recognized by your computer and scan some barcodes into a text field to test.

Cabled RS232 from the CRD3301

Serial mode causes the OPI3301 to transmit data only over a COM port. Choose this mode only if you have software which requires it.

1. Print this barcode sheet and scan the label using your OPI3301.
2. Connect the CRD3301 to your computer using a the RJ45 to DB9 RS232 cable it came with.
3. Connect the CRD3301 to power.
4. Scan the Quick Connect Code on the bottom of the CRD3301. The OPI3301 should chirp, and a solid blue light will appear on the cradle to indicate a good connection.
5. Allow a minute for the cradle to be recognized by your computer and scan some barcodes into a text field to test.

Memorization

The OPI3301 does support memorization but not in the same sense as our Universal Menu Book describes. DTME, then BM1, then DIAU will allow you to memorize when you go out of range(without the annoying reconnecting). I have linked a quick instructional guide here.