Version Differences for XLB1000 OK/NG - Opticon Technical Support Portal

===OK/NG sequencer test results for the NLV-1001 (motor on when idle)===

-

File:NLV-1001.JPG

+

[[Image:NLV-1001 OK NG Sequence.jpg]]

+

''Note 1: The trigger-to-decode time of 45 to 64 ms when the motor is ON when idle is respectively 91ms – 95ms when the motor is OFF when idle

-

Note 1: The trigger-to-decode time of 45 to 64 ms when the motor is ON when idle is respectively 91ms – 95ms when the motor is OFF when idle

Note 2: To test the performance, always present a barcode of high quality at a fixed distance. Before starting the test, make sure that the barcode is read 100 times per second by performing a read test in the laser adjustment mode.

-

OK NG sginal menu options

+

''

+

===OK NG sginal menu options===

Use this menu code sheet to adjust the settings on the scanner

 ===OK/NG sequencer test results for the NLV-1001 (motor on when idle)===
-								File:NLV-1001.JPG
+								[[Image:NLV-1001 OK NG Sequence.jpg]]
 								''Note 1: The trigger-to-decode time of 45 to 64 ms when the motor is ON when idle is respectively 91ms – 95ms when the motor is OFF when idle
-								Note 1: The trigger-to-decode time of 45 to 64 ms when the motor is ON when idle is respectively 91ms – 95ms when the motor is OFF when idle
 Note 2: To test the performance, always present a barcode of high quality at a fixed distance. Before starting the test, make sure that the barcode is read 100 times per second by performing a read test in the laser adjustment mode.
-								OK NG sginal menu options
+								''
 								===OK NG sginal menu options===
 Use this menu code sheet to adjust the settings on the scanner