Version Differences for RS-3000

Line 18:
       
  ===Preparation===    ===Preparation=== 
- # Download the Firmware: Bootloader, Firmware: OS, and Appload for this process available in the [[#Software|Software Downloads]] section. You may also need Opticon's [[#Drivers|USB Drivers]], so please download those as well.   + # Download Appload for this process, which is available in the [[#Software|Software Downloads]] section. You may also need Opticon's [[#Drivers|USB Drivers]], so please download those as well.  
- # Download the appropriate Firmware: Application file for your needs. This is most likely to be the [[#Software|Bluetooth Application]], however there are other Applications available. A complete list can be found in the [[#Software|Downloads Section]] at the bottom of the page.   + # Download the appropriate Firmware: Application file for your needs. This is most likely to be the [[#Software|Bluetooth Application]], however, there are other Applications available. A complete list can be found in the [[#Software|Downloads Section]] at the bottom of the page.  
- # Extract the RS3000 Bootloader and Firmware - OS zip files, the Appload.zip file, the USB Drivers Installer.zip file, and the RS3000 Firmware - Application files into a convenient folder.   + # Extract the RS3000 Firmware - OS zip files, the Appload.zip file, the USB Drivers Installer.zip file, and the RS3000 Firmware - Application files into a convenient folder.  
  # Install [[Appload]] by double-clicking the 'Appload Setup.exe' file, which will start the install wizard. The defaults are fine in most cases, so keep clicking 'Next' until you are finished. Appload will launch at the end of the installation process.    # Install [[Appload]] by double-clicking the 'Appload Setup.exe' file, which will start the install wizard. The defaults are fine in most cases, so keep clicking 'Next' until you are finished. Appload will launch at the end of the installation process. 
  # Connect the RS3000 to your PC    # Connect the RS3000 to your PC 
Line 33:
  {{watchourvideos}}    {{watchourvideos}} 
       
    + ==Alternative Modes==  
    + In addition to the CSP2 support built into the RS3000, it is also capable of functioning as either a USB Keyboard or a USB flash drive. Both of these modes eliminate the need for PC software.  
       
    + When in Keyboard mode, the RS3000 can scan in real-time or store data in memory which can later be transmitted at the push of a button. In flash disk(MSD) mode the RS3000 stores barcode scans into a text file on the device. The text file can later be accessed simply by plugging in the device.  
       
    + ===Batch Mode===  
    + This will make the scanner memorize the data and store it temporarily until the transmit data barcode is scanned  
       
    + *To put the RS3000 in batch mode, Scan the +-MSTR-+ barcode. The device will then be in batch mode and will continue to store the data until the transmit data barcode is scanned.  
    + *To transmit the data and leave the device in batch mode scan the +-MXMT-+ barcode  
    + *To transmit the data and start scanning in real-time mode scan the +-MSTP-+ barcode  
    + *To clear all temporary memorized data off the scanner, scan the +-MCLR-+ barcode  
       
    + [http://ftp.opticonusa.com/Downloads/bluetoothbatchmodecommands.pdf Bluetooth Batch Mode Menu Commands]  
    + ===Bluetooth Low Energy Mode===  
    + Bluetooth Low Energy mode provides reduced power consumption and cost while maintaining a similar communication range as a standard Bluetooth connection. iOS, Android, Windows Phone, Blackberry, macOS, Linux, Windows 8, and Windows 10 all support Bluetooth Low Energy connection. To enable this connection on your RS3000, print and scan this [http://opticonfigure.opticon.com/sl/?z=1cl&a=4&b=0&d=1 barcode sheet] from top to bottom.  
       
    + ==Alternate Firmware==  
       
    + === USB Flash Disk (MSD Mode) ===  
    + This mode makes the RS3000 act like a flash disk and stores the batched bar code into a file. When the RS3000 is connected to a USB cable and plugged into a computer, then a window will pop up asking if you want to browse the files stored. Any bar codes stored will show up in the SCANNED.TXT file. The Firmware: Mass Storage Device Application must be loaded on the RS3000 in order to enable this mode of operation. To install the Storage Application, follow these [[#Firmware_Loading|firmware loading]] instructions. Once the storage application is loaded, print and scan [http://opticonfigure.opticon.com/sl/?z=Fi&a=4&b=0&d=1 this] sheet of barcodes to configure the device to act as a flash disk.  
       
    + Once that's finished, scanning bar codes is as simple as pressing a button. When you want to download your bar code scans, plug the RS3000 into a computer, and copy the text file out of the flash drive. For more configuration options, see the [http://ftp.opticonusa.com/Downloads/User%20Manual%20-%20RFI3793x.pdf User Manual Storage Application]. In particular, the very last page has barcodes that can be scanned to configure the layout of the text file.  
       
    + ===USB Keyboard Mode===  
    + This mode allows the RS3000 to emulate a USB Keyboard. While the RS3000 is plugged in, any barcodes that are scanned are input wherever the cursor is on the screen. When a barcode is scanned while the RS3000 is disconnected, the barcode is stored in memory. When you want to retrieve scanned barcodes, simply plug the RS3000 into a computer, and press any key on the device to have it playback all of the barcodes that were scanned while it was disconnected.  
       
    + To use the RS3000 in USB Keyboard Mode, print and scan this [http://opticonfigure.opticon.com/sl/?z=ki&a=4&b=0&d=1 barcode sheet].  
       
    + ===OPN2001 Simulation===  
    + The OPN2001 Simulation is a batch mode application that uses the Companion Application to download the barcodes. To use the RS3000 with the OPN Companion Application, first the Firmware: OPN2001 Simulation Application must be loaded onto the RS3000. To install the OPN2001 Simulation Application, follow these [[#Firmware_Loading|firmware loading]] instructions. You may also need to print and scan this [http://opticonfigure.opticon.com/sl/?z=kZ-1&a=4&b=0&d=1 barcode sheet].  
       
    + ===Return to Bluetooth Mode===  
    + To return the RS3000 to Bluetooth mode, you will need to load the Firmware: Bluetooth Application. To install the Firmware: Bluetooth Application, follow these [[#Firmware_Loading|firmware loading]] instructions.  
       
  ==Downloads==    ==Downloads== 
       
Line 49:
  | class="center" | [https://www.opticonusa.com/assets/documents/quick-start-guides/Opticon%20RS-3000%20QSG.pdf Download]    | class="center" | [https://www.opticonusa.com/assets/documents/quick-start-guides/Opticon%20RS-3000%20QSG.pdf Download] 
  |-    |- 
    + |User Manual: Bluetooth Application || This is the user manual for the standard Bluetooth Application, which is pre-loaded on all RS3000s prior to shipping. Contains setup instructions and some configuration barcodes, including barcodes to toggle the iOS (iPhone/iPad/iPod) system soft keyboard show/hide feature on and off.  
    + | class="center" | March 2022  
    + | class="center" | [http://ftp.opticonusa.com/Downloads/Documents/CompanionScanners/Bluetooth%20demo%20quick%20setup%20guide.pdf Download]  
    + |-  
    + |User Manual: Storage Application || This is the user manual for the standard storage application, which is designed to demonstrate the RS3000 storage (batch) capabilities. This application supports USB-VCP with [https://wiki.opticonusa.com/techsupport/en/OSEComm OseComm] , and USB-MSD (flash drive) modes.  
    + | class="center" | March 2022  
    + | class="center" | [http://ftp.opticonusa.com/Downloads/Documents/CompanionScanners/Batch%20demo%20quick%20setup%20guide.pdf Download]  
    + |-  
  | iOS toggle Menu Codes || This document contains the two barcodes necessary to enable/disable the keyboard toggle feature when paired with Apple iOS devices (iPhone, iPad, etc.).    | iOS toggle Menu Codes || This document contains the two barcodes necessary to enable/disable the keyboard toggle feature when paired with Apple iOS devices (iPhone, iPad, etc.). 
  | class="center" |     | class="center" |  
Line 64:
  {{dtr_Appload}}    {{dtr_Appload}} 
  |-    |- 
    + | Firmware: OS + Bootloader || The Operating System for the Appload. [[Appload]] (see above) is required for loading the OS onto the RS3000. Unless instructed by Technical Support it is best to download an Application firmware file as these contain the Bootloader and OS as well as the application in a single file for simpler installation.  
    + | class="center" | RAZV0016<br />RBZV0049  
    + | class="center" | [http://ftp.opticonusa.com/Downloads/RS3000/OS%20and%20Bootloader%20Firmware/RS3000_RAZV0016_RBZV0049.zip Download]  
    + |-  
  | Firmware: Bluetooth Application || This standard application provides Bluetooth functionality and data transfer for HID and SPP modes, as well as easy toggling of the iOS (iPhone/iPad/iPod) system soft keyboard. Batch storage is not supported. This application is pre-loaded on all RS3000s prior to shipping. [[Appload]] Version 1.77 or newer (see above) is required for loading this application onto the RS3000. This firmware file contains the OS and Application.    | Firmware: Bluetooth Application || This standard application provides Bluetooth functionality and data transfer for HID and SPP modes, as well as easy toggling of the iOS (iPhone/iPad/iPod) system soft keyboard. Batch storage is not supported. This application is pre-loaded on all RS3000s prior to shipping. [[Appload]] Version 1.77 or newer (see above) is required for loading this application onto the RS3000. This firmware file contains the OS and Application. 
  | class="center" | RBZV0049<br />RFZ3791L    | class="center" | RBZV0049<br />RFZ3791L 
- | class="center" | [http://ftp.opticonusa.com/Downloads/RS3000/RS3000_RBZV0049_RFZ3791L.zip Download]   + | class="center" | [http://ftp.opticonusa.com/Downloads/RS3000/Bluetooth%20Application/RS3000_RBZV0049_RFZ3791L.zip Download]  
    + |-  
    + |Firmware: Storage Application || This application provides a batch storage file of scanned bar codes ([[#USB_Flash_Disk_Mode|MSD]] mode). [[Appload]] (see above) is required for loading this application onto the RS3000.  
    + | class="center" | RBZV0049<br />RFM3791G  
    + | class="center" | [http://ftp.opticonusa.com/Downloads/RS3000/Batch%20Application/RS3000_RBZV0049_RFM3793G.zip Download]  
    + |-  
    + | Firmware: [[OPN2001]] Simulation Application || This application enables the OPN2006 to behave as an [[OPN2001]] with regard to user behavior and PC interaction. The OPN PC Application (see below) is required to transfer data between the OPN and the PC. [[Appload]] (see above) is required for loading this application onto the OPN2006. ''NOTICE: Current and future versions of this Application now support [[#USB_Keyboard_Mode|USB-HID]] in addition to the standard CSP2 features. This application also requires OPN200X PC-applation (V2.11 or higher) for configuration and retrieving data, which can be found in the 'software' section''  
    + | class="center" | RBZV0049<br />RFM3727M  
    + | class="center" | [http://ftp.opticonusa.com/Downloads/RS3000/OPN-2001%20Simulation%20Application/RS3000_RBZV0049_RFM3727M.zip Download]  
  |-    |- 
  {{dtr_mdi4x00}}    {{dtr_mdi4x00}}