Version Differences for PX-36

Line 20:
       
  ==Setup with NetO32==    ==Setup with NetO32== 
- Follow these directions for first time setup, software installation, and configuration for transferring data from the OPL9815.   + Follow these directions for first time setup, software installation, and configuration for transferring data from the PX-36.  
  ===Setting up the Host===    ===Setting up the Host=== 
  ====Collect Materials====    ====Collect Materials==== 
  You will need the following items.    You will need the following items. 
  * A windows computer    * A windows computer 
- * An OPL9815   + * A PX-36  
  * A CRD9723 cradle    * A CRD9723 cradle 
  * A 32-00601-00 power adapter for the CRD9723    * A 32-00601-00 power adapter for the CRD9723 
Line 49:
  # Follow the prompts to finish the installation.     # Follow the prompts to finish the installation.  
  ====Installing NetO32====    ====Installing NetO32==== 
- The OPL9815 uses a piece of windows software called NetO32 to save the data file to the computer. To install NetO32 follow the steps below.   + The PX-36 uses a piece of windows software called NetO32 to save the data file to the computer. To install NetO32 follow the steps below.  
  # Download NetO32 from the [[#Software|Software Downloads section]].    # Download NetO32 from the [[#Software|Software Downloads section]]. 
  # Open the zip file by double clicking on it.    # Open the zip file by double clicking on it. 
Line 71:
  NetO32 is now in 'Polling' mode. Note that you should see the yellow light on the cradle blinking steadily. This means it will sit here indefinitely sending queries to the cradle and waiting for the right response to start a download. Multiple downloads can all be done without ever closing NetO32. When you are done using NetO32 simply select 'Protocol' > 'Stop' and NetO32 will discontinue polling mode. The application can then be closed.    NetO32 is now in 'Polling' mode. Note that you should see the yellow light on the cradle blinking steadily. This means it will sit here indefinitely sending queries to the cradle and waiting for the right response to start a download. Multiple downloads can all be done without ever closing NetO32. When you are done using NetO32 simply select 'Protocol' > 'Stop' and NetO32 will discontinue polling mode. The application can then be closed. 
       
- ===Starting the Upload from your OPL9815===   + ===Starting the Upload from your PX-36===  
       
  After NetO32 is in Polling mode (see [[#Configuring_NetO32|above]]) follow these steps. Note that you should see the yellow light on the cradle blinking steadily. This means it will sit here indefinitely sending queries to the cradle and waiting for the right response to start a download. Multiple downloads can all be done without ever closing NetO32. When you are done using NetO32 simply select 'Protocol' > 'Stop' and NetO32 will discontinue polling mode. The application can then be closed.    After NetO32 is in Polling mode (see [[#Configuring_NetO32|above]]) follow these steps. Note that you should see the yellow light on the cradle blinking steadily. This means it will sit here indefinitely sending queries to the cradle and waiting for the right response to start a download. Multiple downloads can all be done without ever closing NetO32. When you are done using NetO32 simply select 'Protocol' > 'Stop' and NetO32 will discontinue polling mode. The application can then be closed. 
Line 78:
  * The screen that appears should say 'Transmit Data via Cradle NETO Protocol -PRESS ANY KEY-'. Press any key.    * The screen that appears should say 'Transmit Data via Cradle NETO Protocol -PRESS ANY KEY-'. Press any key. 
  * The unit will change to say 'Sending File Waiting NetO Connection ...'. At this point simply place the unit on the cradle.    * The unit will change to say 'Sending File Waiting NetO Connection ...'. At this point simply place the unit on the cradle. 
- * The OPL9815 will emit a series of short beeps and display 'File Was Sent. Delete Data File?'. Choose either YES or NO by pressing the appropriate arrow button below the display.   + * The PX-36 will emit a series of short beeps and display 'File Was Sent. Delete Data File?'. Choose either YES or NO by pressing the appropriate arrow button below the display.  
       
  * The NetO32 status log will indicate that the data was downloaded.    * The NetO32 status log will indicate that the data was downloaded. 
Line 103:
  Follow the Directions above for [[#Installing_USB_Drivers|Installing USB Drivers]]    Follow the Directions above for [[#Installing_USB_Drivers|Installing USB Drivers]] 
  ====Installing [[Appload]]====    ====Installing [[Appload]]==== 
- # Appload is Opticon's multi-purpose utility for installing firmware onto devices such as the OPL9815. To install Appload follow the steps below.   + # Appload is Opticon's multi-purpose utility for installing firmware onto devices such as the PX-36. To install Appload follow the steps below.  
  # Download Appload from the [[#Software|Downloads Software Section]].    # Download Appload from the [[#Software|Downloads Software Section]]. 
  # Open the zip file by double clicking on it.    # Open the zip file by double clicking on it. 
Line 110:
       
  ===Configuring Appload===    ===Configuring Appload=== 
- This section outlines how to configure Appload to communicate with the OPL9815. Appload is a PC application used to load firmware on most of Opticon's products.   + This section outlines how to configure Appload to communicate with the PX-36. Appload is a PC application used to load firmware on most of Opticon's products.  
  ====Select COM Port====    ====Select COM Port==== 
  # Select Settings    # Select Settings 
Line 126:
  You will need to download and unzip the appropriate firmware file for the action you wish to perform from the [[#Software|Software Downloads section]].    You will need to download and unzip the appropriate firmware file for the action you wish to perform from the [[#Software|Software Downloads section]]. 
  ===Loading the Firmware===    ===Loading the Firmware=== 
- ====OPL9815 Firmware Setup====   + ====PX-36 Firmware Setup====  
- * The OPL9815 must be placed into a download mode for firmware to install correctly. To do this follow the steps below.   + * The PX-36 must be placed into a download mode for firmware to install correctly. To do this follow the steps below.  
  * Enter the OS-level system menu on the device (press [up], [scan], and [down] at the same time)    * Enter the OS-level system menu on the device (press [up], [scan], and [down] at the same time) 
  * Choose the menu option to download software    * Choose the menu option to download software 
Line 135:
  * After the OS is finished programming, you can immediately drag the Application file onto Appload or choose 'File' > 'Download' and navigate to the OS firmware file to load the application.    * After the OS is finished programming, you can immediately drag the Application file onto Appload or choose 'File' > 'Download' and navigate to the OS firmware file to load the application. 
  ==Application Development==    ==Application Development== 
- The OPL9815 firmware is split into two levels, an Operating System and an Application. The Operating System Exposes the functions of the hardware to the Application level firmware, and the Application determines how the device behaves. The Operating System is developed and maintained solely by Opticon, however anyone can make an application for the OPL9815 using using the [[#Software|C-Library Kit]]. For code samples please write [mailto:devsupport@opticonusa.com devsupport@opticonusa.com].   + The PX-36 firmware is split into two levels, an Operating System and an Application. The Operating System Exposes the functions of the hardware to the Application level firmware, and the Application determines how the device behaves. The Operating System is developed and maintained solely by Opticon, however anyone can make an application for the PX-36 using using the [[#Software|C-Library Kit]]. For code samples please write [mailto:devsupport@opticonusa.com devsupport@opticonusa.com].  
       
       
Line 155:
  |-    |- 
  <!--    <!-- 
- |Specification Manual || This document provides detailed specifications for the OPL9815. For advanced users and system integrators only.   + |Specification Manual || This document provides detailed specifications for the PX-36. For advanced users and system integrators only.  
  | class="center" |     | class="center" |  
- | class="center" | [http://ftp.opticonusa.com/Downloads/OPL9815%20Specification%20Manual.pdf Download]   + | class="center" | [http://ftp.opticonusa.com/Downloads/PX-36%20Specification%20Manual.pdf Download]  
  |-    |- 
  -->    -->