Version Differences for PX-20

(→Software)
Line 35:
  # When complete the PX20 will emit a series of beeps and reboot. When the LED is steady RED (indicating charging) or GREEN (indicating fully charged) the process is complete and you may disconnect your PX20 from the PC. instruction manuals for the various applications are available for download in the Downloads section.    # When complete the PX20 will emit a series of beeps and reboot. When the LED is steady RED (indicating charging) or GREEN (indicating fully charged) the process is complete and you may disconnect your PX20 from the PC. instruction manuals for the various applications are available for download in the Downloads section. 
       
    + <h2> Batch Mode </h2>  
    + <p> This will make the scanner memorize the data and store it temporarily until the transmit data barcode is scanned  
       
    + <ul>  
    + <li> To put the OPN 2006 in batch mode, Scan the +-MSTR-+ barcode. Device will then be in batch mode and will continue to store the data until the transmit data barcode is scanned. </li>  
    + <li> To transmit the data and leave the device in batch mode scan the +-MXMT-+ barcode </li>  
    + <li> To transmit the data and start scanning in real time mode scan the +-MSTP-+ barcode</li>  
    + <li> To clear all temporary memorized data off the scanner, scan the +-MCLR-+ barcode </li>  
    + </ul>  
       
       
    + [http://ftp.opticonusa.com/Downloads/bluetoothbatchmodecommands.pdf Bluetooth Batch Mode Menu Commands]  
    + </p>  
       
       
  ==Alternative Modes==    ==Alternative Modes== 
  In addition to the CSP2 support built into the PX20, it is also capable of functioning as either a USB Keyboard or a USB flash drive. Both of these modes eliminate the need for PC software.    In addition to the CSP2 support built into the PX20, it is also capable of functioning as either a USB Keyboard or a USB flash drive. Both of these modes eliminate the need for PC software.