Version Differences for PHL8xxx
|
(→Software)
|
(→StepI: Setup)
|
| Line 56: | |||
| ====StepI: Setup==== | ====StepI: Setup==== | ||
| The barcode scanner inside the PHL8xxx runs its own firmware independent of that running Windows. Consequently this firmware can be upgraded should it become necessary. | The barcode scanner inside the PHL8xxx runs its own firmware independent of that running Windows. Consequently this firmware can be upgraded should it become necessary. | ||
| - | * Download the latest firmware for your device from the Downloads table below. | + | * Download the latest barcode reader [http://ftp.opticonusa.com/Downloads/MDL1000%20&%20MDL2000%20&%20MDL3x00%20Firmware%20-%20OS.zip firmware] for your device. |
| - | **For PHL-8xx2 devices (Except PHL8152), download the image in the name format C01-53.XX-EFA2-YYYY where xx is the latest version number. | ||
| - | **For PHL-8xx4 devices and the PHL8152, download the image in the name format C01-54.XX-EFA3-YYYY where xx is the latest version number. | ||
| * Unzip and copy the firmware file to the PHL-8112 either via SD card or over an ActiveSync (or Windows Mobile Device Center) connection. If you use an SD card ensure you use FAT format on an SD card with capacity no greater than 2GB. HC SD cards are not supported. | * Unzip and copy the firmware file to the PHL-8112 either via SD card or over an ActiveSync (or Windows Mobile Device Center) connection. If you use an SD card ensure you use FAT format on an SD card with capacity no greater than 2GB. HC SD cards are not supported. | ||
| *Install a battery with at least 30% charge. | *Install a battery with at least 30% charge. | ||