Version Differences for PHL8xxx
|
(→Software)
|
(added the Backup and Restore section (taken from same section on H15))
|
| Line 51: | |||
| The PHL-8000 is known to work with at least 16GB SDHC cards (tested with Kingston 16GB microSD card with adapter). | The PHL-8000 is known to work with at least 16GB SDHC cards (tested with Kingston 16GB microSD card with adapter). | ||
| + | ==Backup and Restore== | ||
| + | The PHL-8000 has a backup and restore feature that saves your configuration to the DiskOnChip or an SD Card. The DiskOnChip is not reformatted when the device is factory reset. | ||
| + | ===Backup=== | ||
| + | To backup the PHL-8000, navigate to Start > Settings > Control Panel > Control Center > Backup & Restore. The backup can be saved to the internal DiskOnChip or an external SD card. To begin the backup, select "Backup Now" and then "Yes". | ||
| + | ===Restore=== | ||
| + | To restore the PHL-8000, navigate to Start > Settings > Control Panel > Control Center > Backup & Restore. The PHL-8000 can be restored from the internal DiskOnChip or an external SD card. To begin the restore, select "Restore Now" and then "Yes". The device will then proceed to reboot and your settings will be restored. | ||
| + | ===Auto Restore=== | ||
| + | The PHL-8000 has the ability to automatically restore the most recent backup after a cold boot. To use this feature, create a *.cmd file (where * is the name file you wish you create) in the DiskOnChip\Startup\Cold directory containing one of the following statements: | ||
| + | * "cmd /C Backuprestore -DOC" (To restore the backup from the DiskOnChip) or | ||
| + | * "cmd /C Backuprestore -SD" (To restore the backup from the SD card) | ||
| + | Please note that the backup should be present on the specified location or errors may occur. | ||
| ==Firmware Updates== | ==Firmware Updates== | ||
| Notes: These same processes can be used to downgrade the firmware as well as upgrade. Simply select the appropriate firmware file. | Notes: These same processes can be used to downgrade the firmware as well as upgrade. Simply select the appropriate firmware file. | ||