Version Differences for PHL8xxx
|
(→StepI: Setup)
|
(→Scanner Firmware Upgrade)
|
| Line 51: | |||
| The PHL-8000 is known to work with at least 16GB SDHC cards (tested with Kingston 16GB microSD card with adapter). | The PHL-8000 is known to work with at least 16GB SDHC cards (tested with Kingston 16GB microSD card with adapter). | ||
| - | ==Scanner Firmware Upgrade== | + | ==Firmware Updates== |
| Notes: These same processes can be used to downgrade the firmware as well as upgrade. Simply select the appropriate firmware file. | Notes: These same processes can be used to downgrade the firmware as well as upgrade. Simply select the appropriate firmware file. | ||
| - | ===Method 1=== | + | ===Barcode Reader=== |
| ====StepI: Setup==== | ====StepI: Setup==== | ||
| - | The barcode scanner inside the PHL8xxx runs its own firmware independent of that running Windows. Consequently this firmware can be upgraded should it become necessary. | ||
| * Download the latest barcode reader [http://ftp.opticonusa.com/Downloads/MDL1000%20&%20MDL2000%20&%20MDL3x00%20Firmware%20-%20OS.zip firmware] for your device. | * Download the latest barcode reader [http://ftp.opticonusa.com/Downloads/MDL1000%20&%20MDL2000%20&%20MDL3x00%20Firmware%20-%20OS.zip firmware] for your device. | ||
| * Unzip and copy the firmware file to the PHL-8112 either via SD card or over an ActiveSync (or Windows Mobile Device Center) connection. If you use an SD card ensure you use FAT format on an SD card with capacity no greater than 2GB. HC SD cards are not supported. | * Unzip and copy the firmware file to the PHL-8112 either via SD card or over an ActiveSync (or Windows Mobile Device Center) connection. If you use an SD card ensure you use FAT format on an SD card with capacity no greater than 2GB. HC SD cards are not supported. | ||
| Line 69: | |||
| - | ===Method 2=== | + | ===PHL-8000 OS=== |
| ====StepI: Setup==== | ====StepI: Setup==== | ||
| - | The barcode scanner inside the PHL8xxx runs its own firmware independent of that running Windows. Consequently this firmware can be upgraded should it become necessary. | ||
| * Download the latest firmware for your device from the Downloads table below. | * Download the latest firmware for your device from the Downloads table below. | ||
| **For PHL-8xx2 devices (Except PHL8152), download the image in the name format C01-53.XX-EFA2-YYYY where xx is the latest version number. | **For PHL-8xx2 devices (Except PHL8152), download the image in the name format C01-53.XX-EFA2-YYYY where xx is the latest version number. | ||