| Line 1: |
| |
|
+ |
The PHL1600 is an Opticon Terminal device running our proprietary Operating System. It is based on a Microtec processor.
|
| |
|
|
|
| |
|
+ |
==Load Firmware==
|
| |
|
+ |
This section describes how to load firmware onto your PHL1600 device
|
| |
|
+ |
===Load Firmware: OS===
|
| |
|
+ |
* Download and install Appload (see the download table below)
|
| |
|
+ |
* Download and unzip the firmware: OS File from the download table below
|
| |
|
+ |
* Connect your direct load cable to the PC and the PHL1600.
|
| |
|
+ |
* Power OFF your PHL1600
|
| |
|
+ |
* Press [S] + [ENT] + [POWER]
|
| |
|
+ |
: The LED should now be blinking RED and the display should be blank. If not, power off the unit and try again.
|
| |
|
+ |
* Configure Appload
|
| |
|
+ |
** Select 'Settings' > 'Port' > ''COM1 or the name of the USB <-> RS232 adapter you may be using''
|
| |
|
+ |
** Select 'Settings' > 'IrDA adpater/cradle type' > 'Not installed'
|
| |
|
+ |
* Finally, in Appload, select 'File' > 'Download' and browse to the OS file you downloaded. The name should be similar to CBGV0159.hex
|
| |
|
+ |
===Load Firmware: Application===
|
| |
|
+ |
If you have the opportunity please always update the OS prior to updating the Application. This can avoid complications.
|
| |
|
+ |
* Download and install Appload (see the download table below)
|
| |
|
+ |
* Download and unzip the firmware: Application File you wish to use from the download table below. Alternatively your vendor may provide you with custom firmware for use during this process.
|
| |
|
+ |
* Connect your direct load cable to the PC and the PHL1600.
|
| |
|
+ |
* Power OFF your PHL1600
|
| |
|
+ |
* Press [0] + [7] + [POWER] to enter the Operating System's System Menu
|
| |
|
+ |
* Select 'Download Appl'
|
| |
|
+ |
* Select 'via Cable'
|
| |
|
+ |
* Configure Appload
|
| |
|
+ |
** Select 'Settings' > 'Port' > ''COM1 or the name of the USB <-> RS232 adapter you may be using''
|
| |
|
+ |
** Select 'Settings' > 'IrDA adpater/cradle type' > 'Not installed'
|
| |
|
+ |
* Finally, in Appload, select 'File' > 'Download' and browse to the Application file you downloaded.
|
| |
|
|
|
| |
|
|
|
| |
|
+ |
==Downloads==
|
| |
|
|
|
| |
|
+ |
<br />
|
| |
|
+ |
{| style="background-color:#D1D3D4; border: 1px solid" align="center"
|
| |
|
+ |
|align="center" | '''Notice'''
|
| |
|
+ |
|-
|
| |
|
+ |
|align="center" | The downloading and use of any Opticon software implies consent with Opticon's [[EULA | End User License Agreement]].
|
| |
|
+ |
|}
|
| |
|
|
|
| |
|
+ |
===Software===
|
| |
|
|
|
| |
|
+ |
{| style="border: solid;" cellpadding="10" border="1"
|
| |
|
+ |
!style="background-color:#D1D3D4;" | Software
|
| |
|
+ |
!style="background-color:#D1D3D4;" | Description
|
| |
|
+ |
!style="background-color:#D1D3D4;" | Download
|
| |
|
+ |
|-
|
| |
|
+ |
| [[Appload]] || [[Appload]] is a PC application used to load firmware onto your Opticon device. || [http://ftp.opticonusa.com/Downloads/Appload.zip Download]
|
| |
|
+ |
|-
|
| |
|
+ |
| Firmware: OS || This is the main Operating System file for the PHL1600-10 || [http://ftp.opticonusa.com/Downloads/PHL1600-10%20Firmware%20-%20OS.zip Download]
|
| |
|
+ |
|-
|
| |
|
+ |
| Firmware: Application (RapidGen) || This firmware is an application called RapidGen. It must be used in conjunction with the RapidGen PC software || [http://ftp.opticonusa.com/Downloads/PHL1600-10%20Firmware%20-%20Application%20CFG2105x.zip Download]
|
| |
|
+ |
|-
|
| |
|
+ |
| PC Software: RapidGen || This is the PC side software component of RapidGen. || Coming Soon!
|
| |
|
+ |
|-
|
| |
|
+ |
|}
|
