Version Differences for PHL1600 - Opticon Technical Support Portal

===Starting the Upload from your PHL1600===

-

After NetO32 is in Polling mode (see above) follow these steps. First, of course, it is expected that you will have scanned some barcodes using the PHL2700.

+

After NetO32 is in Polling mode (see above) follow these steps. First, of course, it is expected that you will have scanned some barcodes using the PHL1600.

* Select 'Transmit Data' from the main menu (use the arrow keys to move up and down and trigger (center key) to select an option.

* The screen that appears should say "Transmit Data NETO Protocol.

-

* NetO32 status log will indicate that the data was downloaded and the PHL2700 will go back to the main menu transmit data screen.

+

* NetO32 status log will indicate that the data was downloaded and the PHL1600 will go back to the main menu transmit data screen.

* Your Data File is now on the PC in the folder specified previously.

 ===Starting the Upload from your PHL1600===
-								After NetO32 is in Polling mode (see above) follow these steps. First, of course, it is expected that you will have scanned some barcodes using the PHL2700.
+								After NetO32 is in Polling mode (see above) follow these steps. First, of course, it is expected that you will have scanned some barcodes using the PHL1600.
 * Select 'Transmit Data' from the main menu (use the arrow keys to move up and down and trigger (center key) to select an option.
 * The screen that appears should say "Transmit Data NETO Protocol.
-								* NetO32 status log will indicate that the data was downloaded and the PHL2700 will go back to the main menu transmit data screen.
+								* NetO32 status log will indicate that the data was downloaded and the PHL1600 will go back to the main menu transmit data screen.
 * Your Data File is now on the PC in the folder specified previously.