Version Differences for OPR3301 - Opticon Technical Support Portal

7. Connect the OPR3301 to the PC using the [http://opticonfigure.opticon.com/sl/?z=wO&a=4&b=0&d=1 "CNPC" label]. Scan the bar code on the bottom of the cradle to complete the connection. Make sure that the scanner beeps when scanning the cradle label since the label is very fine pitch and the scanner may time out before it has read the label. The Bluetooth LED should be on steadily when the connection is complete. In the Appload RS232 monitor window, send the "Z1" command again. The OPR3301 firmware version should now show 3 lines with the OS, boot loader, and application version.

-

8. Now scan the "+-DOWNLOAD-+" label to put the OPR3301 into download mode. The Appload RS232 window will show instructions on using the Appload menu to download the firmware file.

+

8. Now scan the [http://ftp.opticonusa.com/Downloads/Barcodes/+-Download-+.png "+-DOWNLOAD-+" label] to put the OPR3301 into download mode. The Appload RS232 window will show instructions on using the Appload menu to download the firmware file.

9. In the Appload RS232 monitor window, use File->Transfer->Transmit NetO file to download the firmware. The latest firmware is available below in the [[#Software|Software]] section. Remember when loading OS hex files to use the NR_ version that does not include the RAM loader.

 .  Connect the OPR3301 to the PC using the [http://opticonfigure.opticon.com/sl/?z=wO&a=4&b=0&d=1 "CNPC" label].  Scan the bar code on the bottom of the cradle to complete the connection.  Make sure that the scanner beeps when scanning the cradle label since the label is very fine pitch and the scanner may time out before it has read the label.  The Bluetooth LED should be on steadily when the connection is complete.  In the Appload RS232 monitor window, send the "Z1" command again.  The OPR3301 firmware version should now show 3 lines with the OS, boot loader, and application version.
-.  Now scan the "+-DOWNLOAD-+" label to put the OPR3301 into download mode.  The Appload RS232 window will show instructions on using the Appload menu to download the firmware file.
+.  Now scan the [http://ftp.opticonusa.com/Downloads/Barcodes/+-Download-+.png "+-DOWNLOAD-+" label] to put the OPR3301 into download mode.  The Appload RS232 window will show instructions on using the Appload menu to download the firmware file.
 .  In the Appload RS232 monitor window, use File->Transfer->Transmit NetO file to download the firmware. The latest firmware is available below in the [[#Software|Software]] section.  Remember when loading OS hex files to use the NR_ version that does not include the RAM loader.