Version Differences for OPR3301 - Opticon Technical Support Portal

1. Start with the cradle powered off and the OPR3301 disconnected from the cradle. Set the dip switches on the bottom of the cradle to the Bluetooth-to-RS232 dongle configuration. Switches 2 and 3 ON with the other switches OFF.

+

<br>

{| border="1"

|-

-

| Switch #|| 1 || 2 || 3 || 4 || 5 || 6

+

| Switch #|| 1 || 2 || 3 || 4 || 5 || 6

+

| rowspan="2" | [[Image:Screen shot 2012-02-09 at 7.13.11 PM.png|inline|100px]]

|-

| Status || style="color:red" | OFF|| style="color:green" | ON || style="color:green" | ON ||style="color:red"| OFF ||style="color:red"| OFF ||style="color:red"| OFF

|-

|}

-

[[Image:Screen shot 2012-02-09 at 7.13.11 PM.png|inline|100px]]

2. Apply power to the cradle using an external power supply. The power LED (left RED) should be ON and the Bluetooth LED (right blue) should be blinking. If the Bluetooth LED is on steadily, then the OPR3301 is connected to the cradle. Disconnect the OPR3301 by scanning the "+-DISC-+" label.

 .  Start with the cradle powered off and the OPR3301 disconnected from the cradle.  Set the dip switches on the bottom of the cradle to the Bluetooth-to-RS232 dongle configuration.  Switches 2 and 3 ON with the other switches OFF.
 								<br>
 {| border="1"
 |-
 								| Switch #|| 1 || 2 || 3 || 4 || 5 || 6
 								| rowspan="2" | [[Image:Screen shot 2012-02-09 at 7.13.11 PM.png|inline|100px]]
 |-
 | Status || style="color:red" | OFF|| style="color:green" | ON || style="color:green" | ON ||style="color:red"| OFF ||style="color:red"| OFF ||style="color:red"| OFF
 |-
 |}
-								[[Image:Screen shot 2012-02-09 at 7.13.11 PM.png|inline|100px]]
 .  Apply power to the cradle using an external power supply.  The power LED (left RED) should be ON and the Bluetooth LED (right blue) should be blinking.  If the Bluetooth LED is on steadily, then the OPR3301 is connected to the cradle.  Disconnect the OPR3301 by scanning the "+-DISC-+" label.