| Line 1: |
| |
|
+ |
The OPN3002i Bluetooth Companion Scanner (2D Imager) enables real-time barcode scanning into any Bluetooth ready device including Android, iOS, Blackberry and Windows.
|
| |
|
|
|
| |
|
+ |
The OPN3002i is the 2D cousin of the [[OPN2005]].
|
| |
|
|
|
| |
|
|
|
| |
|
+ |
==Firmware Loading==
|
| |
|
+ |
While there are multiple components to the firmware on an OPN3002i (Bootloader, OS and Application) the instructions to load them individually or all together are the same. In most cases, all you'll need to do is load the OS, and the proper Application file for your needs.
|
| |
|
|
|
| |
|
+ |
===Preparation===
|
| |
|
+ |
# Download the Firmware: Bootloader Firmware: OS, and Appload for this process available in the [[#Software|Software Downloads]] section. You may also need Opticon's [[#Drivers|USB Drivers]], so please download those as well.
|
| |
|
+ |
# Download the appropriate Firmware: Application file for your needs. This is most likely to be the [[#Software|Bluetooth Application]], however there are other Applications available. A complete list can be found in the [[#Software|Downloads Section]] at the bottom of the page.
|
| |
|
+ |
# Extract the OPN3002i Bootloader and Firmware - OS zip files, the Appload.zip file, the USB Drivers Installer.zip file, and the OPN3002i Firmware - Application files into a convenient folder.
|
| |
|
+ |
# Install [[Appload]] by double-clicking the 'Appload Setup.exe' file, which will start the install wizard. The defaults are fine in most cases, so keep clicking 'Next' until you are finished. Appload will launch at the end of the install process.
|
| |
|
+ |
# Connect the OPN3002i to your PC
|
| |
|
+ |
===Install the Firmware===
|
| |
|
+ |
# Launch Appload if it is not already running.
|
| |
|
+ |
# We first need to choose the correct COM port. From the main Appload window, select 'Settings' > 'Port', then choose the port that says 'Opticon USB Code Reader'.
|
| |
|
+ |
# Now we can start downloading the OS and Application. For each of the .hex files you downloaded and extracted above, please choose 'File', then 'Download', then navigate to and select the file. You should see a progress indicator and the words 'Initializing IRdA' if this is working.
|
| |
|
+ |
# When complete the OPN3002i will emit a series of beeps and reboot. When the LED is steady RED (indicating charging) or GREEN (indicating fully charged) the process is complete and you may disconnect your OPN3002i from the PC. instruction manuals for the various applications are available for download in the Downloads section.
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
+ |
==Downloads==
|
| |
|
|
|
| |
|
+ |
{{EULA_Block}}
|
| |
|
|
|
| |
|
+ |
===Documents===
|
| |
|
|
|
| |
|
+ |
{{dt_header|Document}}
|
| |
|
+ |
|-
|
| |
|
+ |
|Quick Start Guide || This is the first step for someone setting up the OPN3002i for the first time via Bluetooth. Be certain to pay attention to which Bluetooth mode you use. [http://en.wikipedia.org/wiki/Human_interface_device HID (Human Interface Device)] is for Bluetooth HID Keyboards and [http://en.wikipedia.org/wiki/Serial_Port_Profile#Serial_Port_Profile_.28SPP.29 SPP (Serial Port Profile)] is for Bluetooth Serial Ports. If uncertain which one to use, choose HID.
|
| |
|
+ |
| class="center" |
|
| |
|
+ |
| class="center" | [http://www.opticonusa.com/modx/downloads/documents/quick_start_guides/OPN3002i%20Bluetooth%20QSG.pdf Download]
|
| |
|
+ |
|-
|
| |
|
+ |
<!--| Quick Start Guide - iPhone/iPad || This Quick Start Guide is ideal for those who will be pairing their OPN3002i with an Apple iPad or iPhone. Minimum firmware version for iPhone/iPad virtual keyboard toggle feature requires firmware RBGV0216 or later. See the Upgrade instructions on this page for details on how to update your unit.
|
| |
|
+ |
| class="center" |
|
| |
|
+ |
| class="center" | [http://ftp.opticonusa.com/OPN2002/Documents/OPN2002%20iPad%20&%20iPhone%20QSG.pdf Download]
|
| |
|
+ |
|-
|
| |
|
+ |
| Quick Start Guide - BlackBerry Playbook || This Quick Start Guide is necessary for those who will be pairing their OPN3002i with a BlackBerry Playbook. Minimum firmware version for BlackBerry Playbook compatibility RBGV0221 or later. See the Upgrade instructions on this page for details on how to update your unit.
|
| |
|
+ |
| class="center" |
|
| |
|
+ |
| class="center" | [http://ftp.opticonusa.com/Downloads/OPN2002_Blkbry_Plybk_QSG.pdf Download]
|
| |
|
+ |
|- -->
|
| |
|
+ |
<!--|User Manual: Bluetooth Application || This is the user manual for the standard Bluetooth Application, which is pre-loaded on all OPN3002is prior to shipping. Contains setup instructions and some configuration barcodes, including barcodes to toggle the iOS (iPhone/iPad/iPod) system soft keyboard show/hide feature on and off.
|
| |
|
+ |
| class="center" |
|
| |
|
+ |
| class="center" | [http://ftp.opticonusa.com/Downloads/User%20Manual%20-%20RFG3531x.zip Download]
|
| |
|
+ |
|- -->
|
| |
|
+ |
<!--|User Manual: Storage Application || This is the user manual for the standard storage Application, which is designed to demonstrate the OPN3002i's storage (batch) capabilities. This Application does not provide Bluetooth functionality, and is meant mostly to demonstrate how to store barcodes for customers that want to create their own customized, embedded application.
|
| |
|
+ |
| class="center" |
|
| |
|
+ |
| class="center" | [http://ftp.opticonusa.com/Downloads/Application%20Manual%20-%20RFG3541x.zip Download]
|
| |
|
+ |
|- -->
|
| |
|
+ |
<!--|User Manual: OPN2001 Simulation Application || This manual describes the usage of the OPN2001 Simulation Application, an embedded application published by Opticon for the OPN3002i, that enables the OPN3002i to behave as an [[OPN2001]] with regard to user behavior and PC interaction. Windows and Mac software specifically written for the [[OPN2001]] is required to transfer or receive data from an OPN3002i running this application.
|
| |
|
+ |
| class="center" |
|
| |
|
+ |
| class="center" | [http://ftp.opticonusa.com/Downloads/User%20Manual%20-%20RFx3510x.zip Download]
|
| |
|
+ |
|- -->
|
| |
|
+ |
| DataSheet || Technical details at a glance.
|
| |
|
+ |
| class="center" |
|
| |
|
+ |
| class="center" | [http://www.opticonusa.com/modx/downloads/documents/datasheets/OPN3002i%20Datasheet.pdf Download]
|
| |
|
+ |
|-
|
| |
|
+ |
<!-- |Specification Manual || This document provides detailed specifications for the OPN3002i. For advanced users and system integrators only.
|
| |
|
+ |
| class="center" |
|
| |
|
+ |
| class="center" | [http://www.opticonusa.com/modx/downloads/documents/specification-manuals/OPN3002i%20Specification%20Manual.pdf Download]
|
| |
|
+ |
|- -->
|
| |
|
+ |
| iOS toggle Menu Codes || This document contains the two barcodes necessary to enable/disable the keyboard toggle feature when paired with Apple iOS devices (iPhone, iPad, etc.).
|
| |
|
+ |
| class="center" |
|
| |
|
+ |
| class="center" | [http://ftp.opticonusa.com/OPN2002/Documents/iOS%20Feature%20Menu%20Codes.pdf Download]
|
| |
|
+ |
|-
|
| |
|
+ |
{{dtr_UMB}}
|
| |
|
+ |
|-
|
| |
|
+ |
{{table_end}}
|
| |
|
|
|
| |
|
+ |
===Software===
|
| |
|
|
|
| |
|
+ |
{{dt_header|Software}}
|
| |
|
+ |
|-
|
| |
|
+ |
{{dtr_Appload}}
|
| |
|
+ |
|-
|
| |
|
+ |
<!-- | Firmware: Bootloader || This is the lowest level of firmware. Unless instructed by Technical Support it is best to download an Application firmware file as these contain the Bootloader and OS as well as the application in a single file for simpler installation.
|
| |
|
+ |
| class="center" | RALV0007
|
| |
|
+ |
| class="center" | [http://ftp.opticonusa.com/Downloads/RAL_3713_xx.zip Download]
|
| |
|
+ |
|-
|
| |
|
+ |
| Firmware: OS || The Operating System for the OPN3002i. [[Appload]] (see above) is required for loading the OS onto the OPN3002i. Unless instructed by Technical Support it is best to download an Application firmware file as these contain the Bootloader and OS as well as the application in a single file for simpler installation.
|
| |
|
+ |
| class="center" | RBLV0019
|
| |
|
+ |
| class="center" | [http://ftp.opticonusa.com/Downloads/RBL_3715_xx.zip Download]
|
| |
|
+ |
|-
|
| |
|
+ |
| Firmware: Bluetooth Application || This standard application provides Bluetooth functionality and data transfer for both HID and SPP modes, as well as easy toggling of the iOS (iPhone/iPad/iPod) system soft keyboard. Batch storage is not supported. This application is pre-loaded on all OPN3002is prior to shipping. [[Appload]] (see above) is required for loading this application onto the OPN3002i. This firmware file contains the latest Bootloader, OS and Application.
|
| |
|
+ |
| class="center" | RALV0007<br />RBLV0019<br />RFL37915
|
| |
|
+ |
| class="center" | [http://ftp.opticonusa.com/Downloads/RAL_3713_xx-RBL_3715_xx-RFL_3791_xx.zip Download]
|
| |
|
+ |
|-
|
| |
|
+ |
| Firmware: [[OPN2001]] Emulator Application || This application enables the OPN3002i to behave as an [[OPN2001]] with regard to user behavior and PC interaction. The OPN PC Application (see below) is required to transfer data between the OPN and the PC. [[Appload]] (see above) is required for loading this application onto the OPN3002i. This firmware file contains the latest Bootloader, OS and Application.
|
| |
|
+ |
| class="center" | RALV0007<br />RBLV0019<br />RFI37277
|
| |
|
+ |
| class="center" | [http://ftp.opticonusa.com/Downloads/RAL_3713_xx-RBL_3715_xx-RFI_3727_xx.zip Download]
|
| |
|
+ |
|- -->
|
| |
|
+ |
{{Dtr_OPN_PC_Companion_Application}}
|
| |
|
+ |
|-
|
| |
|
+ |
{{Dtr_OPN_PC_Companion_Application_Source}}
|
| |
|
+ |
|-
|
| |
|
+ |
{{dtr_C-Library_Kit}}
|
| |
|
+ |
|-
|
| |
|
+ |
{{table_end}}
|
| |
|
+ |
===Drivers===
|
| |
|
|
|
| |
|
+ |
{{dt_header|Driver}}
|
| |
|
+ |
|-
|
| |
|
+ |
{{dtr_usb_drivers_allinone_pc}}
|
| |
|
+ |
|-
|
| |
|
+ |
{{table_end}}
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
+ |
[[Category:OPN]]
|
| |
|
+ |
[[Category:Wireless Solutions]]
|
| |
|
+ |
[[Category:Handheld]]
|
