Version Differences for OPN2005 - Opticon Technical Support Portal

==Reset==

-

In case the device is not responding there is a feature that will allow a reset of the OPN2005. To perform a reset, hold down both buttons (clear/function and scan) for 30-40 seconds. This will reset the device and clear past pairing information. Once reset the pairing process will need to be performed to reconnect the OPN2005 to your device or computer.

+

To restore to factory defaults or in case the device is not responding, there is a feature that will allow a reset of the OPN2005. To perform a reset, hold down both buttons (clear/function and scan) for 30-40 seconds. This will reset the device and clear past pairing information. Once reset the pairing process will need to be performed to reconnect the OPN2005 to your device or computer.

==Firmware Loading==

While there are multiple components to the firmware on an OPN2005 (Bootloader, OS and Application) the instructions to load them individually or all together are the same. In most cases, all you'll need to do is load the OS, and the proper Application file for your needs.

 ==Reset==
-								In case the device is not responding there is a feature that will allow a reset of the OPN2005. To perform a reset, hold down both buttons (clear/function and scan) for 30-40 seconds. This will reset the device and clear past pairing information. Once reset the pairing process will need to be performed to reconnect the OPN2005 to your device or computer.
+								To restore to factory defaults or in case the device is not responding, there is a feature that will allow a reset of the OPN2005. To perform a reset, hold down both buttons (clear/function and scan) for 30-40 seconds. This will reset the device and clear past pairing information. Once reset the pairing process will need to be performed to reconnect the OPN2005 to your device or computer.
 ==Firmware Loading==
 While there are multiple components to the firmware on an OPN2005 (Bootloader, OS and Application) the instructions to load them individually or all together are the same. In most cases, all you'll need to do is load the OS, and the proper Application file for your needs.