| Line 178: |
| |
*7H Tab |
|
*7H Tab |
| |
|
|
|
| - |
=== Links ===
|
+ |
==OS Change Log==
|
| |
|
+ |
*RBBV0106: First official release
|
| |
|
+ |
*RBBV0107: Fix USB problems : "Set configuration" command with value 0 not handled correctly, sometimes OPN2001 returns a STALL response when PC tries to send data.
|
| |
|
+ |
*RBBV0108: Fix : after connecting scanner to PC scanner thinks that it received much data, after sending "EX" command in factory mode, scanner does not reset itself. Implement watchdog timer.
|
| |
|
+ |
*RBBV0109: Fix : crashes during Flash write/erase actions due to enabled interrupts.
|
| |
|
+ |
*RBBV0110: Fix : In factory mode scanner cannot exit laser adjustment mode anymore.
|
| |
|
+ |
*RBBV0111: Fix : Code 39 CD was not transmitted by default, software did not work on older OPN2001 models.
|
| |
|
+ |
*RBBV0112: Fix : Scanner reset when transmitting a large amount of data (Watchdog)
|
| |
|
+ |
*RBBV0113: Scan barcodes, while connected to the PC.
|
| |
|
+ |
*RBBV0114: Clear data with special barcode
|
| |
|
+ |
*RBBV0115: Add support for decoding RSS-14, RSS Limited, and RSS Expanded bar codes.
|
| |
|
+ |
*RBBV0116: Fix telepen numeric bug '00' and Code 128 checksum bug '00'
|
| |
|
+ |
*RBBV0117: Fix length options, set UPC-E1 default to disabled.
|
| |
|
+ |
*RBBV0118: Added : option to reject a bar code which was read before, enable/disable buzzer option, battery low indicator.
|
| |
|
+ |
*RBBV0119: Fix : crash when RTC mode is changed
|
| |
|
+ |
*RBBV0120: Changed : send RTS low or RTS high command only in case RTS level changes.
|
| |
|
+ |
*RBBV0121: Fix : resend RTS message over USB bus upon command. Updated : improve negative label reading.
|
| |
|
+ |
*RBBV0122: Fix : Xmit Code-39 CD option, scan-direction menu XAP, XAQ. Updated : remove Codabar/Code-39 FPD, support Code-39 gap-check options X%K,X%L,true linker support, Support Code-128 menu labels
|
| |
|
+ |
*RBBV0123: Fix : Code39 gap check (X%L) caused the OPN to crash. Changed: default for ‘Transmit C39 CD’, ‘Transmit I2of5 CD’, ‘Addon wait time’ is now 2.
|
| |
|
+ |
*RBBV0124: Fix : Flash erase/write routine
|
| |
|
+ |
*RBBV0125: Fix : RSS bug that caused Application Identifier to be removed twice. Updated code 39 decoder. OPN-2001 parameter document/manual is updated!
|
| |
|
+ |
*RBBV0127: Code-128 not TX CD in front of EAN-128
|
| |
|
+ |
*RBBV0128: Fix : 'Convert EAN8 to EAN13 type' default should be 'disabled'
|
| |
|
+ |
*RBBV0129: Added : Implement request to be able to set buzzer volume even lower
|
| |
|
+ |
*RBBV0131: Added : Aiming mode.
|
| |
|
+ |
*RBBV0131a: Added beam limit mode, readback of Gfk mode (parameter 0x50), parameter for narrow beam (0x05), parameter for aim time (0x13). Check on PZN (Pharma-Zentral-Nummer) barcodes. Reduced the laser output in aiming mode
|
| |
|
+ |
*RBBV0132a: Implement parallel label reading
|
| |
|
+ |
*RBBV0133: Added Codablock-F
|
| |
|
+ |
*RBBV0135a: Fix Code 128 Check digit bug.
|
| |
|
+ |
*RBBV0140: Fixed a potential crash bug when syncing time with a PC, Added support of 'Send Time' command in Appload (for production purposes)
|
| |
|
|
|
| |
|
+ |
== Links ==
|
| |
|
|
|
| |
[[Category:OPN]] |
|
[[Category:OPN]] |
