| Line 25: |
| |
'''Is polling optional or required?''' |
|
'''Is polling optional or required?''' |
| |
:Polling is really meant to automatically detect when the OPN2001 has data, and then download it via a callback function. As such, it's not explicitly required. |
|
:Polling is really meant to automatically detect when the OPN2001 has data, and then download it via a callback function. As such, it's not explicitly required. |
| |
|
+ |
The OPN-2001 is a small handheld wireless barcode reader capable of storing up to 10,000 barcodes at a time.
|
| |
|
|
|
| |
|
+ |
==Factory Reset==
|
| |
|
+ |
To factory reset the OPN-2001 please follow the below instructions.
|
| |
|
+ |
* Ensure the OPN-2001 has sufficient charge (at the least the laser should come on with a trigger press when the unit is unplugged)
|
| |
|
+ |
* Disconnect the OPN-2001 from any USB connections
|
| |
|
+ |
* Press and hold both buttons (scan and clear) for 10 seconds
|
| |
|
+ |
:At the end of the time you will hear a single tone indicating successful reset. While holding the keys the LED will flash RED (If it flashes any other color you are not holding both buttons firmly enough).
|
| |
|
+ |
:'''Note''': It is possible to disable the factory reset option of the OPN-2001 with the SDK (and subsequently our Standard PC Demo Application). If this is disabled this feature will not work until re-enabled.
|
| |
|
|
|
| |
|
+ |
==Loading Firmware==
|
| |
|
+ |
The Firmware of the OPN-2001 can be upgraded (or reloaded in the case of a corrupt firmware) with the following instructions.
|
| |
|
+ |
# Download and install the USB Drivers appropriate for your PC
|
| |
|
+ |
#: [http://www.opticonusa.com/downloads/Software/Drivers/Opticon%20USB%20Drivers%20for%201D%2032bit.zip 32-bit Windows]
|
| |
|
+ |
#: [http://www.opticonusa.com/downloads/Software/Drivers/Opticon%20USB%20Drivers%20for%201D%2064bit.zip 64-bit Windows]
|
| |
|
+ |
# Download and install Appload (The latest version of Appload can be found on its download page [http://www.opticonusa.com/solutions/appload here])
|
| |
|
+ |
# Download the latest firmware for the OPN-2001 (found [http://www.opticonusa.com/solutions/opn2001 here])
|
| |
|
+ |
# Connect the OPN-2001 to the PC
|
| |
|
+ |
# Launch Appload
|
| |
|
+ |
# In Appload select ''''Settings' > 'Port' > 'Opticon USB Code Reader(1D) (COMx)''''
|
| |
|
+ |
# In Appload select ''''Settings' > 'IrDA Adapter/Cradle type' > 'Not installed''''
|
| |
|
+ |
# In Appload select ''''File' > 'Download'''' and browse to the firmware file (e.g. RBBV0139.hex) and click ''''open''''
|
| |
|
+ |
#: The download will take approximately 30 seconds at which time you will see the message 'Download successfully completed'
|
| |
=== OS Release Log === |
|
=== OS Release Log === |
| |
|
|
|
