Version Differences for OPN-2006

(Storage Application (MSD Mode))
(OPN2006 & RS2006)
Line 58:
  ===Reset===    ===Reset=== 
  To restore to factory defaults or in case the device is not responding, there is a feature that will allow a reset of the OPN2006. To perform a reset, hold down both buttons (clear/function and scan) for 30-40 seconds. This will reset the device and clear past pairing information. Once reset the pairing process will need to be performed to reconnect the OPN2006 to your device or computer.    To restore to factory defaults or in case the device is not responding, there is a feature that will allow a reset of the OPN2006. To perform a reset, hold down both buttons (clear/function and scan) for 30-40 seconds. This will reset the device and clear past pairing information. Once reset the pairing process will need to be performed to reconnect the OPN2006 to your device or computer. 
    + ===Battery===  
    + It is possible to check the current battery level of the companion scanner. Follow the [http://opticonfigure.opticon.com/sl/?z=1cy&a=4&b=1&d=1 link here] then print and scan the barcode to have the scanner output its battery level like it would a regular barcode.  
  ==Firmware Loading==    ==Firmware Loading== 
  There are multiple components to the firmware on an OPN2006 (Bootloader, OS and Application), however the instructions to load them individually or all together are the same. In most cases, all you'll need to do is load the OS, and the proper Application file for your needs.    There are multiple components to the firmware on an OPN2006 (Bootloader, OS and Application), however the instructions to load them individually or all together are the same. In most cases, all you'll need to do is load the OS, and the proper Application file for your needs.